I wanted to get an idea of the range of output voltages from microphones, so I did some searching, but I'm having trouble relating mic sensitivity figures to voltage. Can someone tell me what I'm missing in this calculation?
As a random reference, I looked at the specs for a Neumann U87ai, from their website.
-Using cardioid pattern, sensitivity is 28mV/Pa
-Max SPL is 117dB
-Max Vout is 390mV
Here was my logical thought process, which obviously is flawed somehow:
1 Pa is the pressure produced by 94 dBSPL
117dB = 94*1.244, so 117dBSPL should produce 1.244 Pa of pressure
With a sensitivity of 28mV/Pa, 28*1.244 = 34.8mV at 117dB
But they state the max output is 390mV.
So where did I go wrong? If I find a microphone spec that doesn't list max output voltage, how do I correctly convert the sensitivity to a maximum output based on the maximum SPL?
As a random reference, I looked at the specs for a Neumann U87ai, from their website.
-Using cardioid pattern, sensitivity is 28mV/Pa
-Max SPL is 117dB
-Max Vout is 390mV
Here was my logical thought process, which obviously is flawed somehow:
1 Pa is the pressure produced by 94 dBSPL
117dB = 94*1.244, so 117dBSPL should produce 1.244 Pa of pressure
With a sensitivity of 28mV/Pa, 28*1.244 = 34.8mV at 117dB
But they state the max output is 390mV.
So where did I go wrong? If I find a microphone spec that doesn't list max output voltage, how do I correctly convert the sensitivity to a maximum output based on the maximum SPL?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.