Xo1 for tympani 4

[dnasty]

I have an Xo1 I want to use to biamp my tympani 4 I was going over the math for the capacitor to install for the 400ohms cut off my amplifier impedance is 47k ohms after doing the math I come up with.006mf but since I have never done this before I'm not sure if it's right especially after trying to find that value capacitor and didn't have much luck any help would be very appreciated 😕

 

[tyu]

Go right here... thay well tell you albout it.....good luck


The Planar Speaker Asylum

 

[Davey]

I assume you mean 400Hz and not 400 ohms.
The formula is C = 1/(2 * pi * 400 * 47000)
That yields a capacitor value of 8.4 nanofarads. (0.0084 microfarads.)

8.2 nanofarads is a standard value and should be fine for your application.

Dave.

 

[dnasty]

Thanks Dave yes I ment 400hz I will get some and try it