Looking for a pair of Magnequest plate chokes to hear how a complete magnequest parafeed setup will sound like. Thanks.
Any choke value will do, I have a bunch to tube options, I'm using highRp such as 801A for around 20-30mA and also 2A3/45 so 1000-1500ohm.
I've tried an active load for a bit and it sounds really good, tried Lundahl plate chokes and I'm not that impressed to be honest. I have EXO-46 and EXO-100 output from magnaquest, ideally I'd like matching loading chokes for both.
I've tried an active load for a bit and it sounds really good, tried Lundahl plate chokes and I'm not that impressed to be honest. I have EXO-46 and EXO-100 output from magnaquest, ideally I'd like matching loading chokes for both.
I have some 100H Sowter plate chokes that would pair well with your EXO-100 that I would like to sell. They are 100H at 50 or 60mA, I can't quite remember at the moment.
I think I have some BCP chokes that would also be appropriate for a 5K OPT and are gapped for 40-50mA (I would need to go find them to be 100% sure).
I think I have some BCP chokes that would also be appropriate for a 5K OPT and are gapped for 40-50mA (I would need to go find them to be 100% sure).