Anyone actually got their hands on one yet? looks an interesting option against the FR88EX / Bandor 50mm / Omnes BB3.AL / Mark Audio Alpair 5/6.....
Vifa NE85W, 2.5" Fullrange Driver, 4 ohm from Madisound
Vifa NE85W, 2.5" Fullrange Driver, 4 ohm from Madisound
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Last edited:
I also like the look of this one for the bandwidth (if they are being truthful); no idea what they sound like.. 3" aluminium and $30 each. Bit of a sudden rise at 15 khz
http://www.parts-express.com/pdf/264-887s.pdf
http://www.parts-express.com/pdf/264-887s.pdf
nice basket casting - but spoiled by the rather chunky terminal block, which aside from the aesthetics, could make for tight wiring and baffle machining on line arrays with which no doubt some folks will want to experiment
just spotted this line array bargain - 3" poly cone, good bandwidth
Tang Band TGW3-560SE 3" Full Range 20 ohm from Madisound
Tang Band TGW3-560SE 3" Full Range 20 ohm from Madisound
I saw someone posted recently a pic of the basket, but did not give any subjective views on their performance.
There also seems to be two versions, the REv1.1 which has the normal surround and a nicer Response Graph and an FS - 167Hz, and the REv2.0 which has am inverted surround (Pic on Madisound site), more ragged top end (Bigger Breakup Peaks) and an FS - 105Hz.
Quite a big difference
http://www.madisound.com/catalog/PDF/NE85W-04.pdf
http://www.premiumloudspeakers.com/...5W-04 Website Specification Sheet Rev 2_0.pdf
Quite a big difference
http://www.madisound.com/catalog/PDF/NE85W-04.pdf
http://www.premiumloudspeakers.com/...5W-04 Website Specification Sheet Rev 2_0.pdf
For now i am going to pass on these new Vifa's... I wish their 6" driver had a more extended response.
well then, there's always the Alpair 7 and 12 bracketing this nominal dimension -
I finally got a pair of the former installed in some boxes late yesterday evening, and only got a chance to listen to them on some TV. Maybe some music tonight?
That looks virtually identical to a driver of which a buddy of mine acquired a batch of B-stock/warranty returns from some clearance house - they are a very nicely made little driver indeed.
I fabricated a pair of line array towers with 25 per side ( it's handy to have access to a talented CNC operator rather 😉 ) - maybe someday I'll have to listen to them.
- Status
- Not open for further replies.