Original thread link ; http://www.diyaudio.com/forums/equi...verter-project-audio-measurements-tool-7.html
Note:Group buy open the April 6 2010.
CLOSED THE April 11/2010 by Frex.
Hello,
"It's PCB using AN67 from Linear Technology to build an ultra-low THD 10kHz
sine wave oscillator".
For the 10kHz oscillator PCB, if i order 10 boards to Pcbcart the total price
will be 120€ (including Fedex shipping).
So, for end user the price would be : 120€/10 + shipping to end user.
For 1 PCB, the shipping from France would be about 5.5€ to USA (priority letter).
So for USA user the total price would be 12+5.5=17.5€ ~ 23.5USD.
The PCB specifications is 100x160mm, 2 layers, one top layer silkscreen, 2 varnish mask, metalized holes, gold finish RoHs.
If at least 10 DIYers are interested , i can take the order.
Please send me private message and i will make a list with interested people.
Before to proceed to order, i will ask you paypal a payment of each personnal orders.
(I will don't make any money to do that , but i won't to loose mine !)
Frex.
PCB list (to be updated..)
Qty Name(pseudo)
1 Frex ____________OK 🙂
3 ghg ____________ADDRESS OK THANK YOU.___PAID OK
1 ikoflexer_________ADDRESS OK THANK YOU.___PAID OK
2 Sigurd Ruschkow__ADDRESS OK THANK YOU.___PAID OK
2 grenert__________ADDRESS OK THANK YOU.___PAID OK
2 carpin___________ADDRESS OK THANK YOU.___PAID OK
2 Apogee (added the 11/04/2010)__ADDRESS OK THANK YOU.___PAID OK
TOTAL IS 10 PCB.
Price is 120€ for the ten PCB (including shipping to me).
+ shipping to buyer from EU: 3.5€ (1 PCB) 5.8€ (2 PCB)
outside EU: 5€ (1 PCB) 6.8€ (2 PCB)
+1€ for Paypal fees.
Now Waiting all complete e-mail and physical address from buyers.
------
I add Apogee to the buyers list.
Now 12 PCB if everybody still ok.
The individual price will be a little lower than expected...
individual Paypal invoice in preparation...
-Added, 3 boards for Ghg instead of 2.
TOTAL = 13 boards.
INVOICES SENT.Waiting payments.
ALL PAYMENTS WAS DONE.Thank you ! 🙂
Circuit board ordered to PCBcart today.
Waiting for lead time confirmation (Gerber files checking).
----
Hello dear DIYers,
The PCB are on their way to me.
Normally i would receive them on friday.🙂
I will keep you informed...
-------
30-04-2010
All PCB received today by Fedex.
I have need to pay 15.96€ of customs fees...
Each buyers must pay 15.96/13= 1.23€ for each circuit board ordered.
Thank you.
A new table for fees and shipping:
3 ghg ____________FEES_OK__SHIPPED_received, thanks.
1 ikoflexer_________FEES_OK__SHIPPED.
2 Sigurd Ruschkow__FEES_OK__SHIPPED.
2 grenert__________FEES_OK__SHIPPED._received.
2 carpin___________FEES_OK__SHIPPED._received.
2 Apogee _________FEES_OK__SHIPPED._received.
All letters has been sent now.
For EU, the lead time is about 5-7 days,
and outside EU about 10 days.
Frex
Note:Group buy open the April 6 2010.
CLOSED THE April 11/2010 by Frex.
Hello,
"It's PCB using AN67 from Linear Technology to build an ultra-low THD 10kHz
sine wave oscillator".
For the 10kHz oscillator PCB, if i order 10 boards to Pcbcart the total price
will be 120€ (including Fedex shipping).
So, for end user the price would be : 120€/10 + shipping to end user.
For 1 PCB, the shipping from France would be about 5.5€ to USA (priority letter).
So for USA user the total price would be 12+5.5=17.5€ ~ 23.5USD.
The PCB specifications is 100x160mm, 2 layers, one top layer silkscreen, 2 varnish mask, metalized holes, gold finish RoHs.
If at least 10 DIYers are interested , i can take the order.
Please send me private message and i will make a list with interested people.
Before to proceed to order, i will ask you paypal a payment of each personnal orders.
(I will don't make any money to do that , but i won't to loose mine !)
Frex.
PCB list (to be updated..)
Qty Name(pseudo)
1 Frex ____________OK 🙂
3 ghg ____________ADDRESS OK THANK YOU.___PAID OK
1 ikoflexer_________ADDRESS OK THANK YOU.___PAID OK
2 Sigurd Ruschkow__ADDRESS OK THANK YOU.___PAID OK
2 grenert__________ADDRESS OK THANK YOU.___PAID OK
2 carpin___________ADDRESS OK THANK YOU.___PAID OK
2 Apogee (added the 11/04/2010)__ADDRESS OK THANK YOU.___PAID OK
TOTAL IS 10 PCB.
Price is 120€ for the ten PCB (including shipping to me).
+ shipping to buyer from EU: 3.5€ (1 PCB) 5.8€ (2 PCB)
outside EU: 5€ (1 PCB) 6.8€ (2 PCB)
+1€ for Paypal fees.
Now Waiting all complete e-mail and physical address from buyers.
------
I add Apogee to the buyers list.
Now 12 PCB if everybody still ok.
The individual price will be a little lower than expected...
individual Paypal invoice in preparation...
-Added, 3 boards for Ghg instead of 2.
TOTAL = 13 boards.
INVOICES SENT.Waiting payments.
ALL PAYMENTS WAS DONE.Thank you ! 🙂
Circuit board ordered to PCBcart today.
Waiting for lead time confirmation (Gerber files checking).
----
Hello dear DIYers,
The PCB are on their way to me.
Normally i would receive them on friday.🙂
I will keep you informed...
-------
30-04-2010
All PCB received today by Fedex.
I have need to pay 15.96€ of customs fees...
Each buyers must pay 15.96/13= 1.23€ for each circuit board ordered.
Thank you.
A new table for fees and shipping:
3 ghg ____________FEES_OK__SHIPPED_received, thanks.
1 ikoflexer_________FEES_OK__SHIPPED.
2 Sigurd Ruschkow__FEES_OK__SHIPPED.
2 grenert__________FEES_OK__SHIPPED._received.
2 carpin___________FEES_OK__SHIPPED._received.
2 Apogee _________FEES_OK__SHIPPED._received.
All letters has been sent now.
For EU, the lead time is about 5-7 days,
and outside EU about 10 days.
Frex
Last edited: