Hello,
Am ooking to design a 700W power converter using the UC3856. I am reasonably new to this and would like some advise, regarding which topology to use and how to configure the UC3856. Should i use a driver IC or do i use a gate/base transformer? All information will be a help, as i struggle with this project.
What would be a good starting point??
Thanx
Am ooking to design a 700W power converter using the UC3856. I am reasonably new to this and would like some advise, regarding which topology to use and how to configure the UC3856. Should i use a driver IC or do i use a gate/base transformer? All information will be a help, as i struggle with this project.
What would be a good starting point??
Thanx
Um, have you tried looking at other people projects ? It aint that hard to scroll a couple of pages down and see alot of info. For example you can read my thread, I'm doing a 700W halfbridge.
http://www.diyaudio.com/forums/showthread.php?s=&threadid=89481
http://www.diyaudio.com/forums/showthread.php?s=&threadid=89481
- Status
- Not open for further replies.