Gents, I have a challenging issue with my Truepath, an amp I have been very happy with.
It turns on and runs fine for about 30 seconds, mutes, recovers ad infinitum.
I moved house before this happened and the disturbance broke a dry solder joint in the linear PSU, so one of the rails floated up to ~60v, from the nominal 43v. I fixed that but now when the amp starts the rail floats up to ~60v and the mute unmute cycle continues just as before.
Hopefully someone with a more profound understanding of the Truepath will point me in the right direction.
Cheers
It turns on and runs fine for about 30 seconds, mutes, recovers ad infinitum.
I moved house before this happened and the disturbance broke a dry solder joint in the linear PSU, so one of the rails floated up to ~60v, from the nominal 43v. I fixed that but now when the amp starts the rail floats up to ~60v and the mute unmute cycle continues just as before.
Hopefully someone with a more profound understanding of the Truepath will point me in the right direction.
Cheers
- Status
- Not open for further replies.