Switches Needed??

[zozoe]

G'day all & hoping all are well~ I need two of these switches, as the ones in this Harmony Marquis are scratchy & intermittent, even after a good cleaning. FWIW, the screw holes are
29/30 mm apart.
Many thanks in advance to all~

 

[rayma]

Standard 50s-60s-70s slide switch. Not metric.
SLIDE SWITCHES - Dynakit Parts

 

[zozoe]

Ahhhhhh, very cool! DPDT or SPST? They're simple on/off switches.
Many thanks!

 

[rayma]

You have two SPDT switches (three terminals each), but you can get the DPDT version (six terminals each)
and parallel the contacts in each switch, for better reliability.

 

[Kay Pirinha]

You could also take them apart by opening those four lugs that hold the small phenolic board in place, clean them and close them again.

Best regards!

 

[wiseoldtech]

You have two SPDT switches (three terminals each), but you can get the DPDT version (six terminals each)
and parallel the contacts in each switch, for better reliability.

That would be my recommendation as well. 😉

 

[zozoe]

Yeah, I hear ya'll,,, I'm good at this stuff. I already received a 2 pack for under 10 bucks, so IF i screw anything up, I'm good. Nice little guitar it'll be after some TLC & new pups(2).
Be well all~