I'm wondering if anyone has a schematic for the Sima PW-3000 integrated amplifier (the circuit board reads W-2050R). Failing that, perhaps someone has encountered a similar problem.
The amplifier has a persistent hum/buzz on the speaker lines which does not vary with gain. It is loudest when initially powering on the amplifier, a surge which stabilises after one or two seconds.
Any advice?
The amplifier has a persistent hum/buzz on the speaker lines which does not vary with gain. It is loudest when initially powering on the amplifier, a surge which stabilises after one or two seconds.
Any advice?
I should add that I did contact Simaudio, and this was their response:
"Unfortunately, diagrams for this product are no longer available. However, we do continue to service it should you wish to send it to us [...]"
"Unfortunately, diagrams for this product are no longer available. However, we do continue to service it should you wish to send it to us [...]"
Hello
Sima amps was designed by Victor Sima in Canada, and after many years of business he sell his company to Simaudio.
And few years after that, Victor Sima opened another amps company named Linar, but arround a years ago he sell this one to a guy in Ottawa, last time a friend of mine talk to Victor Sima and he told him that high end audio are a difficult business and that's why he sold Linar.
Bye
Gaetan
Sima amps was designed by Victor Sima in Canada, and after many years of business he sell his company to Simaudio.
And few years after that, Victor Sima opened another amps company named Linar, but arround a years ago he sell this one to a guy in Ottawa, last time a friend of mine talk to Victor Sima and he told him that high end audio are a difficult business and that's why he sold Linar.
Bye
Gaetan
Last edited:
yes, thanks, I also received your private message but I'm not interested in paying for them
post them if you wish 🙂
Extremely rare , none of the schematic shops or download sites offer it and I never seen it on eBay and it cost me money...so that's why there is fee.
Send me a pm if you want it.
paba
Send me a pm if you want it.
paba
Last edited:
Extremely rare , non of schematic shops or download sites offer it and never seen it on eBay and it cost me money...so that's there's a fee.
Send me a pm if you want it.
paba
Send me a pm if you want it.
paba
if I had it, I would post it FOR FREE!!!... it is not a big deal to post it and feel good to help someone that needs it.😉
Sima PW3000
Hi.
I need the schematic diagram for this amps , i will make a modification to use this amps for electrical bass amplification.
Thanks.
Hubert Marcil .
Hi.
I need the schematic diagram for this amps , i will make a modification to use this amps for electrical bass amplification.
Thanks.
Hubert Marcil .
- Status
- Not open for further replies.