My shanling t200 has stopped working . unit powers up but transport won't spin and display is dead.I don't think the problem is in the display. has anyone experienced this or know where to find a schematic ?
It sounds like it should darn well be a simple power supply issue that should be fairly easy to track down without a schematic. Probably a +5V supply line.
Shanling
Schematic is available online @ manualslib - oddly the schematic is available but not the owner’s manual. Btw, i have an owner’s manual that was sent to me by Shanling. I also have a SCD T-200. It’s missing the magnetic clamp that holds the cd in place. According to Shanling the device will not work without it. Are you willing to selll me your magnetic clamp? Are you aware of any sort of workaround? Is there anything I can use in place of the magnetic clamp?
I’m in San Francisco
Schematic is available online @ manualslib - oddly the schematic is available but not the owner’s manual. Btw, i have an owner’s manual that was sent to me by Shanling. I also have a SCD T-200. It’s missing the magnetic clamp that holds the cd in place. According to Shanling the device will not work without it. Are you willing to selll me your magnetic clamp? Are you aware of any sort of workaround? Is there anything I can use in place of the magnetic clamp?
I’m in San Francisco