Power light burned out so I replaced with a 8V 70ma that i found. Light blinks about 3 times when first powered on then ok. Light is not very bright either. Could this be the wrong light? Will it harm anything?
I have a friends P10 that I'm collecting parts for a complete rebuild, worth it or not. Someone has already replaced the power lamp with some LEDs that are also very dim, will have to work on that once I get it back together. I can't help you on your lamp choice but what I've been searching high and low for is a schematic, do you have a schematic? It's as these Series II components never existed.
Craig
Craig
Sorry, No repair manual for the SAE TWO P 10 . I really enjoy this amp, it sounds very neutral and works well as a headphone amp too.
Does anyone know how to re-solder the power leads so that I use 220 here in Germany. It was originally a 220 model that was converted to 110 while in America.
Hi guys,
I have a P10 that I bought 20$ not working... but ''surprise'' somebody changed things inside and cut some wires...!
Having the schematics would be great, but for now if someone could just post or send me pictures of PID-352 board (power on light board) on both sides and the main board on both side too so I can figure where goes these wires and see if more parts are missing!
Thanks!
I have a P10 that I bought 20$ not working... but ''surprise'' somebody changed things inside and cut some wires...!
Having the schematics would be great, but for now if someone could just post or send me pictures of PID-352 board (power on light board) on both sides and the main board on both side too so I can figure where goes these wires and see if more parts are missing!
Thanks!
- Status
- Not open for further replies.