Since most of the group buy organized by Carondimonio has been closed 
due to the high minimum number of parts needed I started searching a alternative source for the LM338T I needed.
Luckily I found a shop with a minimum 50 pcs order and a good price for it: only 1,8 Eur/pc
In the diodes section it also carries the MUR1620 (dual 8A diode, parallelable)@0,62 Eur/pc for quantities over 50 pcs.
Looking at the wiki of the previous group buy it seems that the minimum numbers are already reached 😀 , of course if those who signed in confirm their interest.
In the meanwhile I asked for delivery times.
Cheers
Andrea
due to the high minimum number of parts needed I started searching a alternative source for the LM338T I needed.Luckily I found a shop with a minimum 50 pcs order and a good price for it: only 1,8 Eur/pc
In the diodes section it also carries the MUR1620 (dual 8A diode, parallelable)@0,62 Eur/pc for quantities over 50 pcs.
Looking at the wiki of the previous group buy it seems that the minimum numbers are already reached 😀 , of course if those who signed in confirm their interest.
In the meanwhile I asked for delivery times.
Cheers
Andrea
I may be able to get the parts cheaper than that (I am, but I don't know the minimum quantities 🙂). I can check on Monday, but I think the LM338T should be less than 1,5 €.
Best regards,
Mikkel C. Simonsen
Best regards,
Mikkel C. Simonsen
It would be great if we could get lm338T in the deal too, I would love to try regulated PSU. They are verry expensive at my regular dealer (about 12 euro!!).
The price I have for the LM338T is actually only about 1€, but I have to check the quantites required.
Are there any other parts I should check?
Best regards,
Mikkel C. Simonsen
Are there any other parts I should check?
Best regards,
Mikkel C. Simonsen
Maybe the rectifiers specified in the thread and also some Panasonic FC caps should be nice...
Cheers
Andrea
Cheers
Andrea
mcs said:
Hello Mikkel,
please confirm us the prices and charges, etc for an eventual group buy.
In the meanwhile I looked again and it seems that if we get 100 pcs price would drop to 1,3 Eur /pc.
Still waiting for a reply from the supplier about actual availability on stock.
Cheers
Andrea
rectifier
i am interested in some rectifiers....any idea how much will be the postage to india for 20 rectifiers.
thanks.
i am interested in some rectifiers....any idea how much will be the postage to india for 20 rectifiers.
thanks.
Wiki is up
I set up a wiki page to make a survey about the interest in these parts.
Link to Wiki
Note that, in case mcs points a cheaper souce, it might be him that will handle the purchase.
Cheers
Andrea
I set up a wiki page to make a survey about the interest in these parts.
Link to Wiki
Note that, in case mcs points a cheaper souce, it might be him that will handle the purchase.
Cheers
Andrea
I have some prices on the LM338T (from National) and the MUR1620CT (from ON Semi) now.
The LM338T costs approx. 0.80€ each and the MUR1620CT approx. 0.35€ each. The LM338T comes in packs of 45 and the MUR1620 in packs of 50.
Approx. 10€ total shipping cost has to be added to the prices.
Best regards,
Mikkel C. Simonsen
The LM338T costs approx. 0.80€ each and the MUR1620CT approx. 0.35€ each. The LM338T comes in packs of 45 and the MUR1620 in packs of 50.
Approx. 10€ total shipping cost has to be added to the prices.
Best regards,
Mikkel C. Simonsen
Re: Wiki is up
Best regards,
Mikkel C. Simonsen
I don't have to handle anything - I could just send you the parts.Andypairo said:
Best regards,
Mikkel C. Simonsen
mcs said:
These prices seem to be better than expected ;-)
However, hoping not to abuse, I had put the MUR1620CT in because my supplier didn't carry the MUR1520CT originally specified, which is a 15A single diode pin-compatible with most discrete rectifier PCBs.
Does your supplier carry it?
Are there other expenses we shoud be aware of?
Cheers
Andrea
I'll have to ask tomorrow - it's too late now. But it looks like the 1520 costs more than the 1620.Andypairo said:
No, I don't think so. They just add the €10 shipping no matter how much I order it seems. And the prices I gave include VAT.
Best regards,
Mikkel C. Simonsen
Re: Re: Wiki is up
When someone proposes to source parts from a group buy I usually think that he is willing to handle them 😉
After all there were less than 10 participants in the GB
Cheers
Andrea
mcs said:
When someone proposes to source parts from a group buy I usually think that he is willing to handle them 😉
After all there were less than 10 participants in the GB
Cheers
Andrea
Mikkel
Could you get final price on the LM3886T's too? I will order 10-16 depending on the price.
Andrea
It would be great if you could add a collum for the LM3886T in the wiki?
Edgar
Could you get final price on the LM3886T's too? I will order 10-16 depending on the price.
Andrea
It would be great if you could add a collum for the LM3886T in the wiki?
Edgar
Re: Re: Re: Wiki is up
Best regards,
Mikkel C. Simonsen
I am - I just said I don't have to handle it. I think whoever has the cheaper postage rates should handle it 🙂Andypairo said:
Best regards,
Mikkel C. Simonsen
I'll ask. I have asked about the LM3875 before, but the minimum order was 160 pcs. - the price was fine though 😉Edgar said:
Best regards,
Mikkel C. Simonsen
Re: Re: Re: Re: Wiki is up
I didn't include these chips intentionally for respect, since Carondimonio already bought a large batch at his own risk, but nothing prevents from adding it - you can just edit the wiki if Mikkel can (and is willing to) buy them.
I can't but agree
😉
Cheers
Andrea
Edgar said:
I didn't include these chips intentionally for respect, since Carondimonio already bought a large batch at his own risk, but nothing prevents from adding it - you can just edit the wiki if Mikkel can (and is willing to) buy them.
mcs said:
I can't but agree
😉
Cheers
Andrea
Re: Re: Re: Re: Re: Wiki is up
Thanks a lot Andrea!!! You' re a real gentleman, and I mean it!
Andypairo said:
Thanks a lot Andrea!!! You' re a real gentleman, and I mean it!
- Status
- Not open for further replies.