Hello! I have a BSR EQ-3000 that I bought back in college (REALLY long time ago 🙂 ) which I recently brought out to set up, as my son is getting into vintage eqpt and vinyl. So I set it up with my Denon and old Bose speakers and cassette deck. Everything worked fine... for about 30 minutes.
At that point the BSR went dark. Turning it off and on produced a flash from the LEDs on the eq sliders, and a mild crackling noise but nothing else (the LEDs flash then go off, everything stays dead). I verified that everything else still works by physically removing the eq from the loop, and tried letting it sit for 30 mins and plugging it in by itself -- same behaviour (see the video).
Any ideas where to start troubleshooting? I haven't taken it apart yet but I fear that's the next step. Thoughts?
edit: can't get the video to show up properly on my post 🙁
At that point the BSR went dark. Turning it off and on produced a flash from the LEDs on the eq sliders, and a mild crackling noise but nothing else (the LEDs flash then go off, everything stays dead). I verified that everything else still works by physically removing the eq from the loop, and tried letting it sit for 30 mins and plugging it in by itself -- same behaviour (see the video).
Any ideas where to start troubleshooting? I haven't taken it apart yet but I fear that's the next step. Thoughts?
edit: can't get the video to show up properly on my post 🙁
Last edited: