although I´m new to DIY CLASS-D, I´ve been around Loudspeakers and Pro_Audio for quite some time. So it happens I know these modules from Powersoft.
They are equivalent to the ones in the recent DIGAM Series Amps (LD1404 ist about the same as Digimod 1500) with one advandtage: The optional DSP Board. You need a programming interface, which is not that comfortable.
Sound- and power-wise these are very good amps. The Digimods I know couldn´t handle 2 Ohm speakers very well, but otherwise they are very nice 🙂 You only need a housing, fan and the typicla connectors, PSU is already included
They are equivalent to the ones in the recent DIGAM Series Amps (LD1404 ist about the same as Digimod 1500) with one advandtage: The optional DSP Board. You need a programming interface, which is not that comfortable.
Sound- and power-wise these are very good amps. The Digimods I know couldn´t handle 2 Ohm speakers very well, but otherwise they are very nice 🙂 You only need a housing, fan and the typicla connectors, PSU is already included
Does anybody else have experience with these modules?
I've found 2 places selling them:
http://hangshop.hu/shop_art.php?shop_id=4095&cat=418698
http://www.ggsound.it/ampli.htm
Does anybody have any other source for them?
I've found 2 places selling them:
http://hangshop.hu/shop_art.php?shop_id=4095&cat=418698
http://www.ggsound.it/ampli.htm
Does anybody have any other source for them?
I'm new in the DIY-forum.
Powersoft sells the modules only to OEM-Customers and professionell distributors, also for service information and other help.
It's cheaper to buy an PA-Amp with powersoft-modules (digimod) like
Alto D1, D2, D3 or D4 and do some mods for your project.
The Homepage from Alto is
http://www.altoproaudio.com/
In Germany you can buy the Alto's with three years warranty from www.rockshop.de
Does anyoene know how the digimod-modul sounds vs the modules from hypex?
Best regards
Powersoft sells the modules only to OEM-Customers and professionell distributors, also for service information and other help.
It's cheaper to buy an PA-Amp with powersoft-modules (digimod) like
Alto D1, D2, D3 or D4 and do some mods for your project.
The Homepage from Alto is
http://www.altoproaudio.com/
In Germany you can buy the Alto's with three years warranty from www.rockshop.de
Does anyoene know how the digimod-modul sounds vs the modules from hypex?
Best regards
I bought an Alto D3 some time ago because I hade the hope that it might be a nice and cheap high power amplifier. So far it is, but: In terms of sonics I am not happy. It sounds absolutely dead and boring and is easily been beaten by a pair of SymAsyms. Definitely not suitable even as a high quality subwoofer amplifier.
Divi of experience
I have had my digimod 1000 for about five years. I have been extremely happy with the sound, the form factor and the reliability. A bit expensive, though. Especially with the new rack mount offerings from Crown as competition. Still, the size and weight argue for Powersoft.
I have had my digimod 1000 for about five years. I have been extremely happy with the sound, the form factor and the reliability. A bit expensive, though. Especially with the new rack mount offerings from Crown as competition. Still, the size and weight argue for Powersoft.
- Status
- Not open for further replies.