Hello I'm new to amp building and electronics in general, but would still like to attempt to make my own CMoy. I've seen the diagrams on HeadWize and Tangent and I have some sort of understanding of how this thing is hooked up. But the problem is I dont know how things are connected underneath, wether its soldered wired etc. So that is why I would like to see pics of what one looks like so that I'd be able to make my own. Thanks!
Hi,
on Tangents audio-page you should find everything you wanted to know.
http://www.tangentsoft.net/audio/
on Tangents audio-page you should find everything you wanted to know.
http://www.tangentsoft.net/audio/
Can you send me a link to the exact picture, because i've looked through and couldnt find any pics of what the prefboard looks like underneath with all the resistors, transistors etc connected and soldered. Thanks
You could download the micro-Cmoy layout diagram as an example.
If you don´t like that particular layout search headwize or make your own.
The circuit is simple enough; give it a try!
If you don´t like that particular layout search headwize or make your own.
The circuit is simple enough; give it a try!
If you're looking for a PCB layout, check my site. It's a PCB with the CMOY circuit, TLE2624 as a rail splitter (instead of the 2 resistors) & an Ohman crossfeed, which you could jumper if you want to (I can highly recommend it though).
Unfortunatly I can't email you a nicer & bigger layout for the moment, since my pc won't boot 🙁.
Unfortunatly I can't email you a nicer & bigger layout for the moment, since my pc won't boot 🙁.
- Status
- Not open for further replies.