hello, i desperately need the schematics for this amp! i tried to email NetList because he said he had the schematics but as i am a new member it says i am not allowed!
me too
hello netlist,
I have also a dead Peavey CS800X. Please send me a copy of it's schematic. You may send it to jade_808a@yahoo.com. Thank you very much and have a good day.
best regards,
Audiomachines
hello netlist,
I have also a dead Peavey CS800X. Please send me a copy of it's schematic. You may send it to jade_808a@yahoo.com. Thank you very much and have a good day.
best regards,
Audiomachines
Interested in a copy of the cs800x schematics too, I have two amps that are down and needs repairs, any help would be appriciated email to nexxus_technologies@yahoo.com
And for anyone wanting ANY Peavey schematics, all you have to do is contact customer service at Peavey. They will send you any you might want.
Yes they are great! but they run on Mississippi time. Which is a lot like how Molasses runs in winter.
Peavey has always been helpful, but i know its going to be 30 minutes on hold. then one day, someday the parts will arrive or the schematics will show in my inbox. sometimes it takes 2-3 more phone calls to get them moving. sometimes it's just easier to post here and hope someone already has them LOL!
I always advise my clients to call them first thing in the morning - 8AM central time. Phone times are short then. If one waits until lunch time - as does everyone else in America - then you wait in line with the herds.
Hi All
Check out Audio : Service Manual free download,schematics,datasheets,eeprom bins,pcb,repair info for test equipment and electronics
scroll down to peavey
also look in the "professional" page.
lots of information here
Also check out ftp://ftp.vegalab.ru/%D1%C5%D0%C2%C8%D1-%CC%C0%CD%D3%C0%CB%DB/ again lots of schematics.
I know this is off topic, but they have the FULL schematic of AU919 here.
Check out Audio : Service Manual free download,schematics,datasheets,eeprom bins,pcb,repair info for test equipment and electronics
scroll down to peavey
also look in the "professional" page.
lots of information here
Also check out ftp://ftp.vegalab.ru/%D1%C5%D0%C2%C8%D1-%CC%C0%CD%D3%C0%CB%DB/ again lots of schematics.
I know this is off topic, but they have the FULL schematic of AU919 here.
Peavey CS800X diagram
Audiomachines,
can you please send me a copy of the CS800X circuit diagram.
I am having some trouble getting it. My email is <anjie200@gmail.com>
anjola
Audiomachines,
can you please send me a copy of the CS800X circuit diagram.
I am having some trouble getting it. My email is <anjie200@gmail.com>
anjola
I uploaded for you
Take it from here:
peavey cs800s power amplifier schematic pdf
Or if doesn't work, give me a site where I can upload it.
Take it from here:
peavey cs800s power amplifier schematic pdf
Or if doesn't work, give me a site where I can upload it.
CS800S power supply
While the subject is up and before starting a new thread, anybody understand on the CS800S what peavey is doing with the TFMR100, also shown as T105, the IRGP440U FET transistors, and the IC U100 (a TSC44Z3) on page 22 of the schematic I got from eserviceinfo.com? Also shown on Page 5. It looks likes they are measuring the output, and gating the FET's through a transformer to let out current based on that measurement and a bias input. It looks like the current they are letting out is directly rectified off the AC power line. My understanding can't be right is it? I thought switcher power supplies had an internal oscillator that ran really fast, teens of kilohz, into a little toroid transformer that is rectified and DC filtered. Where is the oscillator input?
My CS800S works fine, but if this part blows up I'm afraid it would be just so much scrap metal if I don't understand it better.
While the subject is up and before starting a new thread, anybody understand on the CS800S what peavey is doing with the TFMR100, also shown as T105, the IRGP440U FET transistors, and the IC U100 (a TSC44Z3) on page 22 of the schematic I got from eserviceinfo.com? Also shown on Page 5. It looks likes they are measuring the output, and gating the FET's through a transformer to let out current based on that measurement and a bias input. It looks like the current they are letting out is directly rectified off the AC power line. My understanding can't be right is it? I thought switcher power supplies had an internal oscillator that ran really fast, teens of kilohz, into a little toroid transformer that is rectified and DC filtered. Where is the oscillator input?
My CS800S works fine, but if this part blows up I'm afraid it would be just so much scrap metal if I don't understand it better.
Last edited:
Please send me the peavy cs800x power amplifier schematic diagram ,my amplifier keep shorting out its out put transistors ,dont know what else to do email;adrianalexwong@yahoo.com
- Status
- Not open for further replies.