Hello everyone.
Sorry for my English but I am retired, I live in Poland. My grandson helps me write this post. Last year I got an old, damaged and incomplete PEAWEY CS-400 amplifier model: B-Series, 9-78 from 1978 and I want to bring it to full technical efficiency. Two drive board # 99009030 is missing in this amplifier. I need the appearance (photos) of the PCB from the mosaic side to recreate these modules. The module was developed with one IC type TL071 and the documentation that I bought does not include the PCB appearance (photos). I will be very grateful if you can help me solve my problem.
Sorry for my English but I am retired, I live in Poland. My grandson helps me write this post. Last year I got an old, damaged and incomplete PEAWEY CS-400 amplifier model: B-Series, 9-78 from 1978 and I want to bring it to full technical efficiency. Two drive board # 99009030 is missing in this amplifier. I need the appearance (photos) of the PCB from the mosaic side to recreate these modules. The module was developed with one IC type TL071 and the documentation that I bought does not include the PCB appearance (photos). I will be very grateful if you can help me solve my problem.
you should be able to re-create the PCB if you have the original Peavey service manual but you would need to be skilled with a graphics editing program.
but then you would need to source the same multi pin inline connector that joins the driver board to the output stage.
maybe try the swap meet section to find a donor chassis for the drive boards?
but then you would need to source the same multi pin inline connector that joins the driver board to the output stage.
maybe try the swap meet section to find a donor chassis for the drive boards?
Last edited:
