PARTTIME AUDIOPHILE - REVIEW BY JOHN RICHARDSON
Sparkler Audio Spiral, Ether | Review | Part-Time Audiophile
Sparkler Audio Spiral, Ether | Review | Part-Time Audiophile
Very interesting to see a CD player using the TDA1543. As the partnering 7W integrated amp has a 'current mode' input, what's its current sensitivity (or transresistance if you prefer)?
model S502i ― for current-mode signaling
Input: RCA jack (unbalanced), current-mode (0Ω) ×2, voltage-mode (680Ω) ×1
Input: RCA jack (unbalanced), current-mode (0Ω) ×2, voltage-mode (680Ω) ×1
Thanks for that - do I take it that 'zero ohms' means the input's the -ve input pin on an I/V opamp?
Incidentally 'voltage mode' looks a lot too low impedance at 680ohm.
No indication then how much current input is needed to drive the amp to full power?
Incidentally 'voltage mode' looks a lot too low impedance at 680ohm.
No indication then how much current input is needed to drive the amp to full power?
- Status
- Not open for further replies.