Hello,
I have buyed broken Optoma EzPro 600 from an action site. The lamp is broken so i put a regular 150W halogen in but it's not stay on so i have to bypass the ballast. But how this is my firts projector, i have read here in forum some quides but this projector is more complicated.
Here is the info: http://www.projectorcentral.com/CTX-EzPro_600.htm
Some pictures:
Thank's
I have buyed broken Optoma EzPro 600 from an action site. The lamp is broken so i put a regular 150W halogen in but it's not stay on so i have to bypass the ballast. But how this is my firts projector, i have read here in forum some quides but this projector is more complicated.
Here is the info: http://www.projectorcentral.com/CTX-EzPro_600.htm
Some pictures:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Thank's
There is another topic about this but theres no quide to bypass http://www.diyaudio.com/forums/showthread.php?s=&threadid=14786&perpage=25&highlight=&pagenumber=1
Here is couple zoom pictures:
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Okay now i have taken the hole mainboard away and cut the metal box open and find the ballast. If i just take the box away and connect the wierd is it done?
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
Still working on this. When I remove the ballast the lamp socket voltage drop 220v to 50v but the regular halogen is just blinking one's when I turn it on. So any ideas?
- Status
- Not open for further replies.