Hi guys,
First point, I'm french, and I'm not a big user of English Language, so I will try to be the more comprehensive as possible xD
After some reseach, read topic again and again, I will try to make an amplifier with the parts for an old ONKYO SR606.
My goal is to make an amplifier with the specs below
- 2x80/100W under 8R
- Analog input in the beginning
- Get the parts from the ONKYO, but with a LME49811 that I have in stock
- DIY !!
- Use the project linked here for base : Project 8 – BuildAudioAmps
The voltage after the bridge is 2x55/56V. The LME are genuines.
All schematics are on the second post below 🙂
I will use an ESP32 for check the voltage, temp, delay start, and maybe the preamp for a next part.
Concerning the box, I have assembled something with a subwoofer heatsink and some metal parts 😀
A beautiful paint all will be nice 🙂
I created this topic for shared the information, and for find help and solution if I have some question, I hope ^^
First point, I'm french, and I'm not a big user of English Language, so I will try to be the more comprehensive as possible xD
After some reseach, read topic again and again, I will try to make an amplifier with the parts for an old ONKYO SR606.
My goal is to make an amplifier with the specs below
- 2x80/100W under 8R
- Analog input in the beginning
- Get the parts from the ONKYO, but with a LME49811 that I have in stock
- DIY !!
- Use the project linked here for base : Project 8 – BuildAudioAmps
The voltage after the bridge is 2x55/56V. The LME are genuines.
All schematics are on the second post below 🙂
I will use an ESP32 for check the voltage, temp, delay start, and maybe the preamp for a next part.
Concerning the box, I have assembled something with a subwoofer heatsink and some metal parts 😀
A beautiful paint all will be nice 🙂
I created this topic for shared the information, and for find help and solution if I have some question, I hope ^^
Last edited:
