This crossover does not work as it should. There is a TL594CN IC in the unit.
Here are the measured voltage on each pin:
1=2.11v.
2=2.11v.
3=0.30v.
4=0.07v.
5=1.58v.
6=3.62v.
7=0.04v.
8=7.39v.
9=3.09v.
10=3.10v.
11=7.39v.
12=11.87v.
13=5.05v.
14=5.05v.
15=2.60v.
16=2.12v.
I have checked almost everything else in the unit, but i can't decide if i have a faulty TL594CN here ?
Here are the measured voltage on each pin:
1=2.11v.
2=2.11v.
3=0.30v.
4=0.07v.
5=1.58v.
6=3.62v.
7=0.04v.
8=7.39v.
9=3.09v.
10=3.10v.
11=7.39v.
12=11.87v.
13=5.05v.
14=5.05v.
15=2.60v.
16=2.12v.
I have checked almost everything else in the unit, but i can't decide if i have a faulty TL594CN here ?