I am going to make ATC SCM 100 Classic (not tower) clones, and badly need measurements for the actual original loudspeakers, exactly what I am looking for:
1) Outer measurements
2) Relative measurements for the driver positions, drill holes etc.
3) Inner measurements, inner fotos (what is inside).
I looked what I could find on the web and different fotos I could find, but measurements to produce cabinets I just could not find.
It could as simple as placing measuring tape over the loudspeaker and making foto..
I do not expect that someone has all sizes I need to make wooden cabinets, so please share whatever you have.
Thanks in advance!
1) Outer measurements
2) Relative measurements for the driver positions, drill holes etc.
3) Inner measurements, inner fotos (what is inside).
I looked what I could find on the web and different fotos I could find, but measurements to produce cabinets I just could not find.
It could as simple as placing measuring tape over the loudspeaker and making foto..
I do not expect that someone has all sizes I need to make wooden cabinets, so please share whatever you have.
Thanks in advance!
Go to Google or whatever you prefer and there will be flat earth or atc or another dealer that will post specs of the dimentions in millimeters. Then just eyeball it for the screws and driver holes.
- Status
- Not open for further replies.