This is my new project.
I just finished the planning of the circuit. The prototype tested, but with BD249C/250C output device (I don't want to sacrifice my MJLs, in any case of failure)
The output is 60W/8ohms in class A, and the amplifier can gives about 250W/2ohms before clipping.
Now I planning the PCB, which will contains all parts (I hope), included the psu capacitors.
Sajti
I just finished the planning of the circuit. The prototype tested, but with BD249C/250C output device (I don't want to sacrifice my MJLs, in any case of failure)
The output is 60W/8ohms in class A, and the amplifier can gives about 250W/2ohms before clipping.
Now I planning the PCB, which will contains all parts (I hope), included the psu capacitors.
Sajti
An externally hosted image should be here but it was not working when we last tested it.
hugobross said:sorry, no picture appeared...
Sorry, it works for me.
But here is the link:
http://www.extra.hu/mcc/mjl60.gif
I hope it works!
Sajti
No, doesn't work.
May work for you because you already have the picture in your browser cache.
Perhaps you might try to attach it to a posting?
May work for you because you already have the picture in your browser cache.
Perhaps you might try to attach it to a posting?
I attached it, but it not appears. Maybe the Hungarian site not works properly. I will try to find some other site to put up.
Sajti
Sajti
HBarske said:
We try the download picture with my collegue's PC. He never see it before. It works.
If any body can put it up to his site, I will send it by mail.
Thanks: Sajti
Sajti's picture
I am posting this image for Sajti.
I am posting this image for Sajti.
An externally hosted image should be here but it was not working when we last tested it.
- Status
- Not open for further replies.