I managed to get another 50 photos up tonight. My friend (who's hosting the photos) says that he's getting hits from other audio forums. I guess the word is spreading. We're giving his new server a good breaking in.😀
Here's the link again.
http://dlison.dyndns.org:10004/RoddYama/index.php?currDir=.
And again, thanks for making it a worthwhile effort.
Rodd Yamashita
PS: Peter "Potter", take a look at the Cardas pics. There's one special for you.😀
Here's the link again.
http://dlison.dyndns.org:10004/RoddYama/index.php?currDir=.
And again, thanks for making it a worthwhile effort.
Rodd Yamashita
PS: Peter "Potter", take a look at the Cardas pics. There's one special for you.😀
Good gravy, please tell me those are miniature cigarettes
. You can actually see the front of the rack deflect under the load!
. You can actually see the front of the rack deflect under the load!An externally hosted image should be here but it was not working when we last tested it.
Hey Brian,
The problem with El Pipe-O would have been the hole Kent would have to cut into the room on the second floor for the 14ft. pipe. Of course that would have been one hell of a reflex chamber.😀
Rodd Yamashita
The problem with El Pipe-O would have been the hole Kent would have to cut into the room on the second floor for the 14ft. pipe. Of course that would have been one hell of a reflex chamber.😀
Rodd Yamashita
AudioFreak said:
Alright... 😀
Here is the disclaimer for the above picture:
DISCLAIMER... the above shown picture of El Pipe-O is a fake. It actually wasn't at CES in the Pass Labs booth. If you honestly believe that it was there in its full glory, then you are gullible. Sorry for the crappy editing, as I only have mspaint on this computer...
--
Brian
roddyama said:
Proposed plans for next year:
1) reserve 2 rooms, one on the first floor, and one on the second floor.
2) bring earplugs or lots of alcohol.
3) bring a pair of X1000 amps.
4) bring extra drivers for those excessive bass lines.
--
Brian
At those truly low frequencies couldn't they just lay it down sideways? I don't think it matters that the drivers would be on one side. A theoretical question: Could the driver box be in the middle of the tube with 7' extending each way?
roddyama said:
Also, remember to bring extra pairs of pants for those so called "Brown Notes(tm)"
--
Brian
An externally hosted image should be here but it was not working when we last tested it.
Them boys at Spendor must have a pretty good table saw!
Noam
Yeah, it cut the foam and the cone as clean as it cut the fiberboard.😀Noam said:
Rodd Yamashita
Hi All,
Another 50 photos are up tonight. You can find them here:
http://dlison.dyndns.org:10004/RoddYama/index.php?currDir=.
There is also a link to this site from my new home page (that's all there is on my home page
) at:
www.roddyama.com
Enjoy,
Rodd Yamashita
Another 50 photos are up tonight. You can find them here:
http://dlison.dyndns.org:10004/RoddYama/index.php?currDir=.
There is also a link to this site from my new home page (that's all there is on my home page
) at:www.roddyama.com
Enjoy,
Rodd Yamashita
roddyama said:
Damn, it cut right clean through the magnet, too! I want one of those. Or were those magnets plastic.
Noam
Calm down
those cutted speakers are only for demonstrations
a kind of "paper moon" or "make believe"
the normal in production line is something quite different
Be very glad you never see such normal samples cut up
/halo - still in one piece
those cutted speakers are only for demonstrations
a kind of "paper moon" or "make believe"
the normal in production line is something quite different
Be very glad you never see such normal samples cut up
/halo - still in one piece
Noam said:
Damn, it cut right clean through the magnet, too! I want one of those. Or were those magnets plastic.
www.rootingoutevil.org
Noam
Noam,
www.rootingoutevil.com, is that supposed to be a joke or is that a serious website?
Cheers,
Rob
- Status
- Not open for further replies.