Hello everyone.
How could I duplicate the power ON/OFF button using minipc (MELE QUIETER HD3Q) hardware?
I cannot use original button on the minipc case, because my DIY project has a new case... With PI4 its very easy, because Rasperry has not a power on/off switch
thanks
How could I duplicate the power ON/OFF button using minipc (MELE QUIETER HD3Q) hardware?
I cannot use original button on the minipc case, because my DIY project has a new case... With PI4 its very easy, because Rasperry has not a power on/off switch
thanks
From the picture it looks like the power switch has its own board held on by 2 screws and connected by a plug and lead to the main board.
You could remove the power board and install it on your new case then run an extended cable to the main board.
https://store.mele.cn/products/mele...i-6-bt-5-2-usb-3-2-3-vga-type-c-dp-vesa-mount
You could remove the power board and install it on your new case then run an extended cable to the main board.
https://store.mele.cn/products/mele...i-6-bt-5-2-usb-3-2-3-vga-type-c-dp-vesa-mount
Thak you DRONE7, Unfortunally I can't use original power board because new cabinet has own power led button. I read about the possibility of some BIOS setting that automatically restarts the PC at each power failure. It could be a solution because this condition can be handled with the new on/off button. Do you know something about this BIOS setting?
Thanks
Thanks