I am selling my Lyra Dorian, which has been checked and updated with a new boron cantilever and Micro Ridge stylus by Ana Mighty Sound. Since the retip it has been only used 10-20 hours.
Frequency range : 10Hz - 50kHz
Cantilever system : Boron rod cantilever, natural diamond, Namiki MicroRidge line-contact stylus (2.5 x 75 micrometers profile)
Channel separation : 30dB or better at 1kHz
Internal impedance : 9.5 ohms
Output voltage : 0.6mV (5.0cm/sec., zero to peak, 45 degrees)
Cartridge weight (without stylus cover) : 6.4g
Compliance : Approx. 12 x 10-6 cm/dyne at 100Hz
Centerline through mounting holes to stylus tip : 9.5 mm
Recommended tracking force : 1.8 - 2.0g
Recommended impedance : 100 ohms to 47 kohms
Tracking ability: 80 micron / 315 Hz / lateral / 18mN
Location: Budapest
Asking price: EUR 790 + shipping
I can pack it very safe, I shipped many cartridges in the past.
Frequency range : 10Hz - 50kHz
Cantilever system : Boron rod cantilever, natural diamond, Namiki MicroRidge line-contact stylus (2.5 x 75 micrometers profile)
Channel separation : 30dB or better at 1kHz
Internal impedance : 9.5 ohms
Output voltage : 0.6mV (5.0cm/sec., zero to peak, 45 degrees)
Cartridge weight (without stylus cover) : 6.4g
Compliance : Approx. 12 x 10-6 cm/dyne at 100Hz
Centerline through mounting holes to stylus tip : 9.5 mm
Recommended tracking force : 1.8 - 2.0g
Recommended impedance : 100 ohms to 47 kohms
Tracking ability: 80 micron / 315 Hz / lateral / 18mN
Location: Budapest
Asking price: EUR 790 + shipping
I can pack it very safe, I shipped many cartridges in the past.
Attachments
