legato original comsumption

[back]

hi guys,

i am reading at legato 1 manual consumption 360ma.

is it per rail or total?

 

[Russ White]

In this case what is sunk from one rail must be sourced from the other. 🙂 So it is technically both.

 

[back]

so one placid at 410ma is ok?

it`s realy hot but i can still touch the heatsinks.

 

[Russ White]

Placid HD-BP?

If so, yes it should be just fine. Just check the shunt current, and aim for about 50ma.

 

[back]

bp the old one not HD.

i think the current is a little less because i have no buffer maybe 300ma.

 

[back]

i lowered current and i think that it is total because i have no voltage drop until 200ma per rail but i have at 180ma.

i left it at 250ma and now i will do some listening to see if i it sounds the same.