Hey Eric,
Any reason why you need them to be so big? I have a set from Parts Express that are perfect, but they're only about an inch and a half or so long.
http://www.partsexpress.com/pe/show...&St3=-75250932&DS_ID=3&Product_ID=14971&DID=7
Any reason why you need them to be so big? I have a set from Parts Express that are perfect, but they're only about an inch and a half or so long.
http://www.partsexpress.com/pe/show...&St3=-75250932&DS_ID=3&Product_ID=14971&DID=7
Need them large cause my ports are at the bottom of the Sonotube, dont want them firing into the floor. Right now I use concrete feet from a barbecue grille to raise up the sub.
Two suggestions:
partsconnexion.com has "tenderfeet" which are fairly large.
zalytron has some quite big spikes I saw when I was last there... they are black-anodized aluminum jobs. I don't know what they were called... sorry. But the owner of the place can find them for you.
Neither of these will approach the size of something like the wilson puppy paws from the watt/puppy's. That's what you really want. You could see if a wilson dealer could get you a set, or see if there are any W/P owners selling theirs for less than $20k.
🙂
partsconnexion.com has "tenderfeet" which are fairly large.
zalytron has some quite big spikes I saw when I was last there... they are black-anodized aluminum jobs. I don't know what they were called... sorry. But the owner of the place can find them for you.
Neither of these will approach the size of something like the wilson puppy paws from the watt/puppy's. That's what you really want. You could see if a wilson dealer could get you a set, or see if there are any W/P owners selling theirs for less than $20k.
🙂
- Status
- Not open for further replies.