(2) CDT500/64k Renkus Heinz. Pulled from the CT5/64k speaker pair, same combo as what fits in the CDT-1 without bracket and rear weather protection cup (drivers are sealed anyway, so the same performance). If you want point source from a HUGE 24" x 24" horn exit! 103db Pattern Control down to 500hz. Reminds me of the original Lambda Unity or Danley Synergy. Too large for my application, which is why I am selling. Sound great!
$500 per horn w/driver and crossover included or $900 for the pair (w/drivers and both crossovers). Buyer pays actual shipping cost (24x24x24 box, 30lbs per drive - I may be able to fit everything into one box)
Photos show the actual horns, no cracks and output show they both pass rub&buzz test on Dayton DATS3 woofer tester (horn disconnected during test).
Shipped from Nashville, TN area. My Ebay name is "daus300b". PayPal. PM me if interested.
More info: https://www.renkus-heinz.com/product_detail/cdt500/
CDT500 series horns feature Complex Conic waveguide technology
and the unique Renkus-Heinz CDT-1L CoEntrant mid/high frequency
driver. They offer smooth pattern control down to 500 Hz along with
tonal quality unattainable with conventional high frequency drivers.
CoEntrant Topology (U.S. Pat. 5,526,456)
Integrates a midrange cone and HF compression driver into a true point source with inherent time-alignment.
Complex Conic: The Next Step in Horn Evolution
Complex Conic horns provide superior pattern control and more natural sound; may be rotated 90º.
High-Frequency Compression Driver
Provides crystal clear highs from 1800 Hz to18 kHz.
Eight-Inch Mid-Range Cone Transducer
Easily extends response down to 350 Hz with low distortion.
Weather Resistant Design
Sealed driver enclosure and weather resistant cone offer maximum protection from the elements.
Choice of Coverage Patterns
Choose between 90º by 40º, 60º by 40º , 60º by 60º and long throw 40º by 40º designs
Choice of Models
The CDT500-64K is a medium throw horn with a 60º by 40º coverage pattern.
The CDT500-94K is a medium throw horn with a 90º by 40º coverage pattern.
The CDT500-44K features long throw 40º by 40º dispersion.
The CDT500-66K features 60º by 60º coverage, ideal for overhead distributed systems used in large high ceiling areas.
All four models provide tight pattern control down to 500 Hz and below. They come complete with a built-in crossover and a weather resistant housing for the driver/crossover network.
$500 per horn w/driver and crossover included or $900 for the pair (w/drivers and both crossovers). Buyer pays actual shipping cost (24x24x24 box, 30lbs per drive - I may be able to fit everything into one box)
Photos show the actual horns, no cracks and output show they both pass rub&buzz test on Dayton DATS3 woofer tester (horn disconnected during test).
Shipped from Nashville, TN area. My Ebay name is "daus300b". PayPal. PM me if interested.
More info: https://www.renkus-heinz.com/product_detail/cdt500/
CDT500 series horns feature Complex Conic waveguide technology
and the unique Renkus-Heinz CDT-1L CoEntrant mid/high frequency
driver. They offer smooth pattern control down to 500 Hz along with
tonal quality unattainable with conventional high frequency drivers.
CoEntrant Topology (U.S. Pat. 5,526,456)
Integrates a midrange cone and HF compression driver into a true point source with inherent time-alignment.
Complex Conic: The Next Step in Horn Evolution
Complex Conic horns provide superior pattern control and more natural sound; may be rotated 90º.
High-Frequency Compression Driver
Provides crystal clear highs from 1800 Hz to18 kHz.
Eight-Inch Mid-Range Cone Transducer
Easily extends response down to 350 Hz with low distortion.
Weather Resistant Design
Sealed driver enclosure and weather resistant cone offer maximum protection from the elements.
Choice of Coverage Patterns
Choose between 90º by 40º, 60º by 40º , 60º by 60º and long throw 40º by 40º designs
Choice of Models
The CDT500-64K is a medium throw horn with a 60º by 40º coverage pattern.
The CDT500-94K is a medium throw horn with a 90º by 40º coverage pattern.
The CDT500-44K features long throw 40º by 40º dispersion.
The CDT500-66K features 60º by 60º coverage, ideal for overhead distributed systems used in large high ceiling areas.
All four models provide tight pattern control down to 500 Hz and below. They come complete with a built-in crossover and a weather resistant housing for the driver/crossover network.
