• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: Magnepan MG12 outboard crossovers (upgraded)

Status
Not open for further replies.
These have been SOLD!

A few months ago I embarked on an upgrade project for my MG12s. As it turns out the panels are beyond my ability to repair them and I don't have the coin to have them rebuilt by Magnepan at the moment.

These were built by me and upgraded according to the article by James Carroll Found here: http://www.audience-av.com/reviews/PDF/MG12CrossoverUpgrade.pdf

Here's the parts list:

4 - Jantzen 0.1uF Capacitors
2 - Solen 20uF Capacitors
2 - Dayton 40uF Capacitors
2 - Solen 10uF Capacitors
2 - Alphacore 2.7mH 16Ga Inductors
2 - Dayton Binding Posts
2 - Meritline Barrier Strips
2 - Assorted Misc Hardware

Some of it I had on hand and some I bought. There's about $270 worth of parts. They're built on oiled walnut boards and use the original MG12 connection plate.

Please note that the fuse and tweeter jumper are not in use but could easilly be wired back in if desired.

Asking price for the pair is $150 delivered to a CONUS address. No additional charge for PayPal as I prefer it for payment.

Since I don't visit this forum very often the best way to contact me if interested is by email at: jeff DOT hoak AT gmail DOT com

An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.


Thanks for looking!!!
 
Last edited:
Status
Not open for further replies.