Dear,
To sell :
- number 1: 1 Metcal STSS-002 power supply + 1 handle Metcal STSS-RM3E + 5 tip cartridge (3 x STTC-145P, 1 x STTC-122, 1 x STTC-117) +1 workstand Metcal STSS-WS4 with new sponge +100g solder (a new one, not the one on the picture) +1 power supply cable 220/240V EU +1 cartridge removal pad
The station was recently performed by a technician and works perfectly. 5 cartridge were tested.
The price includes everything in the photo (see list below). The station has scratches.
SOLD
- number 2: another Metcal STSS-RM3E + 1 tip cartridge (STTC-136). It is a 25$ tip...
RESERVED
- number 3: 1 OKi Metcal MFR-H1-SC2 + 4 cartridge (1 x SFP-CN04,1 x SFP-CH25 , 2 x SFP-CH10).
SOLD
- number 4: 4x SFP cartridge (tested)
15E + Shipping
To sell :
- number 1: 1 Metcal STSS-002 power supply + 1 handle Metcal STSS-RM3E + 5 tip cartridge (3 x STTC-145P, 1 x STTC-122, 1 x STTC-117) +1 workstand Metcal STSS-WS4 with new sponge +100g solder (a new one, not the one on the picture) +1 power supply cable 220/240V EU +1 cartridge removal pad
The station was recently performed by a technician and works perfectly. 5 cartridge were tested.
The price includes everything in the photo (see list below). The station has scratches.
SOLD
- number 2: another Metcal STSS-RM3E + 1 tip cartridge (STTC-136). It is a 25$ tip...
RESERVED
- number 3: 1 OKi Metcal MFR-H1-SC2 + 4 cartridge (1 x SFP-CN04,1 x SFP-CH25 , 2 x SFP-CH10).
SOLD
- number 4: 4x SFP cartridge (tested)
15E + Shipping
Attachments
Last edited:
I already have a metcal, but would say to anyone looking that its a great investment. Even let's flux globbers like me seem as if they can solder well!
Yes, I bought a new one with a desoldering gun and iron, that is why I sell this one.
They are the best for me because they can run very fast and desolder/solder on large pcbs ground.
They are the best for me because they can run very fast and desolder/solder on large pcbs ground.
I'll pile on too. These metcal irons are outstanding, head and shoulders above any of the standard technology irons. It was a revelation when I got my first one.
they are expensive and IMHO worth every penny.
Sheldon
they are expensive and IMHO worth every penny.
Sheldon
Used METCAL Soldering System STSS-002 220V
Your nice price please, outside eBay?
Best regards,
Antonio
Your nice price please, outside eBay?
Best regards,
Antonio
Dear accruz,
I'll put it on ebay at 199E + 20E for the postal service (with no reserve price). It is a good price for a professional soldering station with all the accessories.
Contact me if you are interested outside eBay. 😉
I'll put it on ebay at 199E + 20E for the postal service (with no reserve price). It is a good price for a professional soldering station with all the accessories.
Contact me if you are interested outside eBay. 😉
199 -> 189 E -> 180 E -> 150E
last price... it's the cost of a cheap station whih cheap tips.
here it is professional tool
last price... it's the cost of a cheap station whih cheap tips.
here it is professional tool
No news from previous people. PM if interested, we can discuss shipping price if you are in EU. 😉
No news from RM who have reserved, so the thread is open again.
To sell:
- number 1: 1 Metcal STSS-002 power supply + 1 handle Metcal STSS-RM3E + 5 tip cartridge (3 x STTC-145P, 1 x STTC-122, 1 x STTC-117) +1 workstand Metcal STSS-WS4 with new sponge +100g solder (a new one, not the one on the picture) +1 power supply cable 220/240V EU +1 cartridge removal pad
- number 2: another Metcal STSS-RM3E + 1 tip cartridge (STTC-136). It is a 25$ tip...
- number 3: 1 OKi Metcal MFR-H1-SC2 + 4 cartridge (1 x SFP-CN04,1 x SFP-CH25 , 2 x SFP-CH10). Theses tips and this handset is not compatible with the station
number 1 : 150E
number 1 + number 2: 200E
number 1 + number 2 + number 3 : 230E
Shipping to EU can be discuss by PM
I can ship to US but the price from France is not good.
To sell:
- number 1: 1 Metcal STSS-002 power supply + 1 handle Metcal STSS-RM3E + 5 tip cartridge (3 x STTC-145P, 1 x STTC-122, 1 x STTC-117) +1 workstand Metcal STSS-WS4 with new sponge +100g solder (a new one, not the one on the picture) +1 power supply cable 220/240V EU +1 cartridge removal pad
- number 2: another Metcal STSS-RM3E + 1 tip cartridge (STTC-136). It is a 25$ tip...
- number 3: 1 OKi Metcal MFR-H1-SC2 + 4 cartridge (1 x SFP-CN04,1 x SFP-CH25 , 2 x SFP-CH10). Theses tips and this handset is not compatible with the station
number 1 : 150E
number 1 + number 2: 200E
number 1 + number 2 + number 3 : 230E
Shipping to EU can be discuss by PM
I can ship to US but the price from France is not good.
Switching from a regular Weller fire stick to a used Metcal that I picked up used off the bay has upped my soldering skills considerably. And the business end of it all is like holding a fat pen instead of an unwieldy iron. Very high quality tool meant for production work that is just fine on your bench. The quick change tips is a nice bonus.
BillWojo
BillWojo
Hi BillWojo,
Yes I agree with you. I am using a metal station still 5 years and I will not go back. I test the last Weller soldering station but I prefer the metal, it is more responsive and powerful.
RM buy the Metcal, perhaps he will comment here about his new station 😉
Yes I agree with you. I am using a metal station still 5 years and I will not go back. I test the last Weller soldering station but I prefer the metal, it is more responsive and powerful.
RM buy the Metcal, perhaps he will comment here about his new station 😉
- Status
- Not open for further replies.