I have an Electrocompaniet Preampliwire I with onboard MC phono stage. However, the manuals for my hi-fi equipment were lost by the furniture removal company when I moved house recently. If anyone has a copy of the manual I would really appreciate it.
The bit I really need is the section which explains how to switch the preamp from MC to MM by removing the phono board, then installing capacitors and resistors in its place. There is also a method for increasing the gain of the phono stage by changing plug-in resistors. Lastly, there is the section on how to change the MC phono stage feedback resistors to suit different cartridges such as Denon, Ortofon or Van den Hul.
BTW, I am not in the sinbin (I was put in the sinbin due to an administrative error, not because I broke forum rules at any time). I have decided to repost the thread as being in the sinbin may have given other users a bad impression of me.
For further details on the sinbin mistake, check out this link to the relevant explanation by diyaudio.com moderator Cal Weldon.
The bit I really need is the section which explains how to switch the preamp from MC to MM by removing the phono board, then installing capacitors and resistors in its place. There is also a method for increasing the gain of the phono stage by changing plug-in resistors. Lastly, there is the section on how to change the MC phono stage feedback resistors to suit different cartridges such as Denon, Ortofon or Van den Hul.
BTW, I am not in the sinbin (I was put in the sinbin due to an administrative error, not because I broke forum rules at any time). I have decided to repost the thread as being in the sinbin may have given other users a bad impression of me.
For further details on the sinbin mistake, check out this link to the relevant explanation by diyaudio.com moderator Cal Weldon.
I noticed this unfortunate mistake.
Credits to Cal Weldon fix this so quickly.
Good moderator job and action 🙂
--------------------
Electrocompaniet Preampliwire I
with onboard MC phono stage
The Manual lost. I am sure some one will send you!
Did you search forum for:
Electrocompaniet PreAmpliwire
I am quite sure this amplifier has been discussed.
If you are lucky, some topic has got an attached schematic.
Regards, Lineup 😎
Credits to Cal Weldon fix this so quickly.
Good moderator job and action 🙂
--------------------
Electrocompaniet Preampliwire I
with onboard MC phono stage
The Manual lost. I am sure some one will send you!
Did you search forum for:
Electrocompaniet PreAmpliwire
I am quite sure this amplifier has been discussed.
If you are lucky, some topic has got an attached schematic.
Regards, Lineup 😎
Yes, I did a search. No-one has discussed the phono stage. Some diyaudio.com users have the user manual, but I was unable to contact them because I am a new user who has not made many posts. I have just sent an email to another diyaudio.com user, doanh, as he has (or had) the manual. (I am now able to send emails to other users because I have made several posts).
check your email. you should have the manual.
I apologize to other users who also asked me a while back for the manual. It took a while to search thru all the boxes to find it.
I apologize to other users who also asked me a while back for the manual. It took a while to search thru all the boxes to find it.
doanh said:
doanh
tnx for received manual from other thread , and I really mean - tnx !!
can you send me this one , too ?
>sasica5@gmail.com<
Hi Doanh
Could i have a copy too?? What is the diffirence between ampliwire and EC1???
From the other thread I understood you had one of these and would part with it ????
A couple of months back I managed to purchase a Aw250 amp in perfect condition, very good sounding amp, a EC preamp to go with it would be nice.
Alex
Could i have a copy too?? What is the diffirence between ampliwire and EC1???
From the other thread I understood you had one of these and would part with it ????
A couple of months back I managed to purchase a Aw250 amp in perfect condition, very good sounding amp, a EC preamp to go with it would be nice.
Alex
My email is alexmiguel33@hotmail.com.
I have family living in Newark, woud you send it there, or maybe could they pick it up from you?? Is it still in good order?? Name your price??
I have family living in Newark, woud you send it there, or maybe could they pick it up from you?? Is it still in good order?? Name your price??
Thanks for the Electrocompaniet EC-1 user manual
Hi Doanh,
Thanks very much for the Electrocompaniet EC-1 user manual. (I received it today). I really appreciate it.
Steve
Hi Doanh,
Thanks very much for the Electrocompaniet EC-1 user manual. (I received it today). I really appreciate it.
Steve
Just a suggestion:
You can email browser your address by clicking their email button at the bottom of the window. This will avoid having your email address out there in the public domain.
As it turns out, browser was sent to the bin by way of human error. When registering new accounts one has to be very careful not to drag too far or too quickly. One also has to pay attention to what one is doing. 😉
Mea culpa.
You can email browser your address by clicking their email button at the bottom of the window. This will avoid having your email address out there in the public domain.
As it turns out, browser was sent to the bin by way of human error. When registering new accounts one has to be very careful not to drag too far or too quickly. One also has to pay attention to what one is doing. 😉
Mea culpa.
I see that several people got a copy of this schematic/manual, I PMed the person who had
it originally with no response. Would someone who still has it send me a copy
please? PM for email address.
Trying to debug a low output signal problem.
TIA
it originally with no response. Would someone who still has it send me a copy
please? PM for email address.
Trying to debug a low output signal problem.
TIA
just send me an email directly.. I have changed computers several times so I will have to find it again.
I still have this pre-amp if someone out there is interested.
I still have this pre-amp if someone out there is interested.
- Status
- Not open for further replies.