Hi everyone,
I want to build an Ambler "tilt" tone control (in Baxandall's improved version), which requires a 10k linear pot. Since I want it to be stereo, I would need a dual gang pot. Looking at various pots available at Mouser, most linears seem to have rather poor matching between the gangs. I believe the best I found was Bourns 91R2A-R22-B15 (16mm conductive plastic). So the question is, is there anything better for similar amount of money? (~14€ a piece)
I want to build an Ambler "tilt" tone control (in Baxandall's improved version), which requires a 10k linear pot. Since I want it to be stereo, I would need a dual gang pot. Looking at various pots available at Mouser, most linears seem to have rather poor matching between the gangs. I believe the best I found was Bourns 91R2A-R22-B15 (16mm conductive plastic). So the question is, is there anything better for similar amount of money? (~14€ a piece)
If the balance is within 20% or 1%, your ears will not detect any difference.
Bourns are a good manufacturer ... but https://uk.farnell.com/bourns/91r1a-r22-b15l/potentiometer-linear-10kohm-20/dp/2328035?pm=true is not a tandem pot!
A good selection here; https://uk.farnell.com/w/c/passive-...=linear&no-of-gangs=2&track-resistance=10kohm
Bourns are a good manufacturer ... but https://uk.farnell.com/bourns/91r1a-r22-b15l/potentiometer-linear-10kohm-20/dp/2328035?pm=true is not a tandem pot!
A good selection here; https://uk.farnell.com/w/c/passive-...=linear&no-of-gangs=2&track-resistance=10kohm
Last edited:
