Diy atmos project, educate me

[Schurter]

So I have 4 in wall (atmos) speakers off Amazon, built a box sealed done, but temporarily.

My goal was to buy volt 10 for atmos, BUT c19 has caused a few problems,
I did order ht10 x5 and 4 lab15 at the time.
Over a year ago from diysound ground.

So let's try and build a set

Please correct me if I am wrong / educate

My thoughts
- 10" driver maybe 8"
Speakers on list
b&c 10fcx64 or 8fcx51
Eminence kl3010cx ,
what compression driver ?
Open to other ideas,
( goal is a really nice to really really nice speaker)

Box probably like the volt 10
Will try ported and sealed box in winisd

No idea on how to make the xover stuff.


So please educate me
If there is a good post with alot of info please attach

 

[Galu]

Welcome to the forum!

I will give your thread a nudge.

I'm sure that members would appreciate links to the speaker drivers you mention.

If you do a google search for "diyaudio dolby atmos speaker" you may come upon some useful information.

 

[profiguy]

I'd go with the eminence KL3010CX and faital HF10AK. Both are great drivers.

 

[Schurter]

Eminence KL3010CX-8 - 10" Coaxial

B&C Speaker 10FCX64 - 10" Coaxial


Again I am open to different ideas, open to different speakers, budget is open if you give me 3