• The swap meet forum is for private non-commercial transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

DCX MOD PARTS PILGHAM AUDIO

Status
Not open for further replies.
Jump to Latest
I

IMSTOOPID

Member
Joined 2007
#1
DCX-SRC/Clock clock kit assembled.. NEW
factory assembled new... $100 USD
this is the kit that contains the connector also to mount to dcx board and instructions


(2) DCX - Vreg 5V $30 ea USD
one missing one surface mount cap ( not sure why, but may have stole a part off it)
there were factory assembled and tested.
I'll put the correct part back on and re-test
One reg is factory fresh


I was going to link 2 DCX mono for a 4 way active that did not pan out.
these are parts that I did not use in second unit and have been siting on shelf for a year or two that i forgot about
they do make a big sonic improvement over the stock DCX esp if you are using a aes/ebu or spidif 24/96 input

I'll pay for shipping to you!
 
Status
Not open for further replies.
Top Bottom