Anyone use this driver before? If so, what did you do to get the best response out of it? I'll be pairing it with two B&C 6HCX51 6.5" Neodymium Coaxial Speakers.
Let me know and thanks!
Let me know and thanks!
It would be placed under a bed and facing up. It's for a 2.1 system in a bedroom.
Thanks!!
So after running some designs in Term Pro, I came up with a 3cf box 10x24x24.
With a slot port 16" deep by 2" tall by 20" wide.
I get this curve: https://www.screencast.com/t/dSwGtLgT
Port area is 16in squared.
Does this sound right?
With a slot port 16" deep by 2" tall by 20" wide.
I get this curve: https://www.screencast.com/t/dSwGtLgT
Port area is 16in squared.
Does this sound right?
Oh yeah I'm dumb. I read an article that says ports should be 16" deep regardless, is that true?
Trying to do a slot port here as I like the look better than a round one.
Hi! First time poster... any ideas on using the same Dayton Audio LS12-44 12" Low Profile Subwoofer as an in-wall sub for home theater application?
- Status
- Not open for further replies.