Hey all, I'd like to build my own crossover with the same point / slope as this one:
EV Crossover - Album on Imgur
I believe the crossover point here is 1,700hz....but not sure on the slope.
Any help is appreciated!
-Jim
EV Crossover - Album on Imgur
I believe the crossover point here is 1,700hz....but not sure on the slope.
Any help is appreciated!
-Jim
Can you tell us about the application? Is this to replace a defective EV ZX1-90 speaker crossover? The design of this crossover will only work properly with the speakers that it was meant for.
Sorry, my plan is to just have the frequency split at speaker level and I’ll do the dsp with my computer.
I can build the crossover just curious what the stock frequency and slope is. EV says 1700hz but no detail on the slope.
Jim
I can build the crossover just curious what the stock frequency and slope is. EV says 1700hz but no detail on the slope.
Jim
What drivers do you use and do you physically posses the pictured crossover?
To tell something about the slope, we would need more pictures or preferably a schematic.
To tell something about the slope, we would need more pictures or preferably a schematic.
I'm thinking along with TBTL. If you have these parts we can help you measure it exactly. If you have the crossover you can draw the schematic.