I have a pair of surplus (to me) crossovers. There are some inductors on them that should be of value to someone (not me anymore as I've gone active). There are also some poly caps and resistors, but consider them free. The inductors are:
0.5mH 18g (total of 2)
1mH 15g P-core (total of 4)
0.65mH 15g P-core (total of 2)
0.13mH 18g (total of 2)
There are a few 5.6uF, 12uf, and 10uF poly caps as well.
All the above are soldered on to PCBs. So the inductors are easy to remove as the leads are fairly long. The caps are little more difficult, but should not be bneyond the capability of anyone who knows which end of a soldering iron to hold .
There's about $100 worth of inductors here if bought new, so how $35 plus shipping from 02067 (Massachusetts).
0.5mH 18g (total of 2)
1mH 15g P-core (total of 4)
0.65mH 15g P-core (total of 2)
0.13mH 18g (total of 2)
There are a few 5.6uF, 12uf, and 10uF poly caps as well.
All the above are soldered on to PCBs. So the inductors are easy to remove as the leads are fairly long. The caps are little more difficult, but should not be bneyond the capability of anyone who knows which end of a soldering iron to hold .
There's about $100 worth of inductors here if bought new, so how $35 plus shipping from 02067 (Massachusetts).
Attachments
