Hello Diy Community,
I have purchased a 2*Chinese chassis with these dimensions.
External :
Width :220mm
Height : 52mm
Depth: 226mm
Internal :
Width200mm
Height 48mm
Depth 217mm
The total height of the SMPS600 is 45mm so I am well within range. I have seen other chassis which are 70mm in height and I feel it is too much of an overkill for the SMPS600 and a waste of space. Since I will be having two separate chassis for the two channels. I feel this should suffice. Please let me know your suggestions. Please post any experiences with this combination.
Thanks,
nils9
I have purchased a 2*Chinese chassis with these dimensions.
External :
Width :220mm
Height : 52mm
Depth: 226mm
Internal :
Width200mm
Height 48mm
Depth 217mm
The total height of the SMPS600 is 45mm so I am well within range. I have seen other chassis which are 70mm in height and I feel it is too much of an overkill for the SMPS600 and a waste of space. Since I will be having two separate chassis for the two channels. I feel this should suffice. Please let me know your suggestions. Please post any experiences with this combination.
Thanks,
nils9