Hi Everyone...
I'm liking this Apex Jr. Thread. I will be using this thread to let you
guys know of some of the deals I get in and post them before
they're put on the website.
THANKS JASON AND MARK and all others too, for all your hard work.
For my 1st post, I got in some box high end film caps;
500 ea Vishay/Roederstein F 1772-447-2000 MKT Type
.47 UF 275V Retail at $3.14 ea .75ea
http://www.newark.com/vishay-roederstein/f17724472000/film-capacitor/dp/95F9073
These are X2 noise suppression type
70 ea Rifa PHE 426 Polyproplyne
10 UF 250V $3.00ea
Steve
I'm liking this Apex Jr. Thread. I will be using this thread to let you
guys know of some of the deals I get in and post them before
they're put on the website.
THANKS JASON AND MARK and all others too, for all your hard work.
For my 1st post, I got in some box high end film caps;
500 ea Vishay/Roederstein F 1772-447-2000 MKT Type
.47 UF 275V Retail at $3.14 ea .75ea
http://www.newark.com/vishay-roederstein/f17724472000/film-capacitor/dp/95F9073
These are X2 noise suppression type
70 ea Rifa PHE 426 Polyproplyne
10 UF 250V $3.00ea
Steve
Last edited:
Hi Steve, are these phe426 polypropylenes?
Yes, I made the changes on the 1st post.
Steve @ Apex Jr
There's "SPECIAL PURCHASE 4.7uf 400 Volt Metalized polyproplene cap $1.00ea" on the 'New' page.dont suppose youve got them in 400V, any thing from 5uF and up would work?
Steve: Is the idea to offer the Rifa caps here on diyaudio before they get listed on the website?
Luke....
In the box type capacitors I go as high as 10Uf 250V no 400V
have smaller box types in smaller quantities not listed on the
website.
10n 2000V
.1Uf 275Vac
.47Uf listed above in 1st post
1 Uf 275V
10Uf 200V listed in 1st post above
I do have other round and oblong poly caps listed on the site
as Tosh mentioned.
Tosh...
Yes, I sometimes give this forum 1st crack at items before there
listed on the website.
I've already posted these on the website but a good item non the less.
Nichicon 10,000Uf 50 V radial caps are in stock at 2.50 ea
Also have coming in next week a good quantity of Panasonic
Snap-In caps 18,000 Uf 50V that I will also be selling at $2.50 ea
Steve @ Apex Jr.
In the box type capacitors I go as high as 10Uf 250V no 400V
have smaller box types in smaller quantities not listed on the
website.
10n 2000V
.1Uf 275Vac
.47Uf listed above in 1st post
1 Uf 275V
10Uf 200V listed in 1st post above
I do have other round and oblong poly caps listed on the site
as Tosh mentioned.
Tosh...
Yes, I sometimes give this forum 1st crack at items before there
listed on the website.
I've already posted these on the website but a good item non the less.
Nichicon 10,000Uf 50 V radial caps are in stock at 2.50 ea
Also have coming in next week a good quantity of Panasonic
Snap-In caps 18,000 Uf 50V that I will also be selling at $2.50 ea
Steve @ Apex Jr.
Luke...
There not in stock yet, just bought them yesterday. They will be in
stock next week.
I can tell you this;
There Panasonic TS-UP Series and Part # ECOS1HP183EA 18,000Uf 50V
Size I will have to post when they arrive
Steve @ Apex Jr
There not in stock yet, just bought them yesterday. They will be in
stock next week.
I can tell you this;
There Panasonic TS-UP Series and Part # ECOS1HP183EA 18,000Uf 50V
Size I will have to post when they arrive
Steve @ Apex Jr
They are standard 35mm diameter and 45mm high, 85 degrees centigrade 3000 hour rated. Ripple current 6.94A at 120Hz.
Last edited:
Thanks Richie...
I didn't think to look it up, I just did Link below
http://www.panasonic.com/industrial/components/pdf/PIC_TS-UP_SERIES_DNE.pdf
Steve @ Apex Jr.
I didn't think to look it up, I just did Link below
http://www.panasonic.com/industrial/components/pdf/PIC_TS-UP_SERIES_DNE.pdf
Steve @ Apex Jr.
Hi Steve
I would like to ask if the Rifa PHE 426 Polyproplyne 10 UF 250V $3.00ea and the 4.7uF still available , and postage to Sydney Autralia ?
Regards
I would like to ask if the Rifa PHE 426 Polyproplyne 10 UF 250V $3.00ea and the 4.7uF still available , and postage to Sydney Autralia ?
Regards
Yes, both caps are still in stock.
In order to get you a cost for shipping I'll need to know how many
you would want of each. I do have a $20.00 Usd minimum order
Also at this time I am on vacation and will be back at work on
Jan 6th and will be able to ship then.
Steve
steve.apexjr@prodigy.net
In order to get you a cost for shipping I'll need to know how many
you would want of each. I do have a $20.00 Usd minimum order
Also at this time I am on vacation and will be back at work on
Jan 6th and will be able to ship then.
Steve
steve.apexjr@prodigy.net
- Status
- Not open for further replies.
- Home
- More Vendors...
- Apex Jr
- Box caps