Have a few items for sale, as I do not need them any longer.
Items are all tested and working and in very good conditions. If there is interest post and you need a pic, pls send PN.
In case of, please be patient - I'll answer, even it might take a bit.
+ ALLO USB bridge (NOT signature - !!!) running Volumio OS, yet DietPi is available as well ______ 90 Euro
sold - thank you!
+ ALLO KALI RECLOCKER 44/48 MHZ
sold - thank you!
+ IAN CANADA ISOLATOR for raspi and odroid
sold - thank you!
+ Orchard ApplePi DAC DUAL PCM1794
sold - thank you!
+ Raspberry 3b V1.2 _no chassis no psu
sold - thank you!
+ MiniDSP 2x4 naked - not boxed!
sold - thank you!
+ Allo Piano2.1 raspberryPi Hat Dac
sold - thank you!
P&P will depend on what you need for your safety. Germany insured 6 €, for Europe not insured: 8€ and insured: 14€ for items above.
Following pcbs I would send in padded envelopes and cost would be between 4 and 5 €.
I added a few pcbs, I do not need as well. Usually minmum order is 5 pcs, so there always are a few left over, which I would like to offer here. Price ist not really for the item, more for the handling. So if you like to get more, cost will be lower.
+ Small version of Nelson Pass ACP+, a great small headamp - I like it very much. pcb design: withmatt, white: 2 pcs available à 5 Euro
all sold - thank you!
+ VRDN voltage regulator. Design Marc Johnson, blue: 2 available, 4 Euro each
all sold - thank you!
+ Discrete Diamond Fon Feedback I/V for TDA1541A by Pedja Rogic, PCB design by dcb-project, green: 2 pcs available à 4 Euro
all sold - thank you!
+ EASYDAC, mobile AD1862 USB powered DAC, design and PCB artwork by Miro1360, this is my mobile DAC, thread on DIYAudio, green: 3 available à 3 Euro
+ AD1862 DAC by Miro1360 - his design and artwork - great DAC! pcb rev 1.3.(dil opamp socket), green: 3 available, 3 Euro each
one gone - thank you!
+ AD1862 DAC by Miro1360 - his design and artwork - great DAC! pcb rev 1.3.(dip opamp socket), white: 3 available, 3 Euro each
+ Marc Johnsons SMPS inline filter, design and PCB layout by Marc Johnson, white, 5 available à 1 Euro
all sold thank you!
+ Formula3 HP, design Lineup, layout Prasi; haven't yet built it, but I will; green: 2 available, 3 Euro each.
1 sold thank you!
+ Whammy HPA, small smd version, great desing by Wayne Colburne, layout by BOLOR, white: 3 available, 3 Euro each.
1 sold thank you!
+ M2 Amp. Design Nelson Pass, very nice and compact layout Prasi, white: 2 available 4 Euro each.
sold - thank you!
NEW + MISSOURI Input Card (for edcor trafo and THAT1200) for Pass Sony V-Fet Amp and THESEUS Amp - circuit design and art work: Marc Johnson - 2 available - 4 Euro each (2 needed for a stereo amp)
NEW + THESEUS - PSFILT - Filterboard for PSU - 2 oz copper - circuit design and art work: Marc Johnson - 2 available - 7 Euro each
!!! There are some more pcbs left over from my last attempt trying to bring a few things under people. Here is the link. If you think, prices are too high, offers are welcome if you keep them realistic. I reserve the right not to reply to what I consider to be inappropriate offers. https://www.diyaudio.com/community/...in-europe-pcbs-and-ldr-pre-usb-bridge.339885/
+++ from the old thread, the complete Salas shunt parts are sold - thank you.
+++ from tho old thread, Cap Mx and small Cap Ms pending.
I would send pcbs in a padded envelope. Germany: 1,60 € plus 2,35 € for a registered letter. Europe: 3,70 for a letter and 6,05, if it should be a registered one.
Fully built and working amps:
+ Noir HPA - Marks diskret SE class A headphone amp. Pls see pictures further down. Fully built (Mouser parts and chinese DACT type pot) and working - with MeanWell PSU: 150 Euro
probably ACA 24V linear PSU 1.4A Iq in nice chassis and Salas DCG3 coming (if anybody is interesed, please ask)
Thanks for looking 🙂
Ernst
Items are all tested and working and in very good conditions. If there is interest post and you need a pic, pls send PN.
In case of, please be patient - I'll answer, even it might take a bit.
+ ALLO USB bridge (NOT signature - !!!) running Volumio OS, yet DietPi is available as well ______ 90 Euro
sold - thank you!
+ ALLO KALI RECLOCKER 44/48 MHZ
sold - thank you!
+ IAN CANADA ISOLATOR for raspi and odroid
sold - thank you!
+ Orchard ApplePi DAC DUAL PCM1794
sold - thank you!
+ Raspberry 3b V1.2 _no chassis no psu
sold - thank you!
+ MiniDSP 2x4 naked - not boxed!
sold - thank you!
+ Allo Piano2.1 raspberryPi Hat Dac
sold - thank you!
P&P will depend on what you need for your safety. Germany insured 6 €, for Europe not insured: 8€ and insured: 14€ for items above.
Following pcbs I would send in padded envelopes and cost would be between 4 and 5 €.
I added a few pcbs, I do not need as well. Usually minmum order is 5 pcs, so there always are a few left over, which I would like to offer here. Price ist not really for the item, more for the handling. So if you like to get more, cost will be lower.
+ Small version of Nelson Pass ACP+, a great small headamp - I like it very much. pcb design: withmatt, white: 2 pcs available à 5 Euro
all sold - thank you!
+ VRDN voltage regulator. Design Marc Johnson, blue: 2 available, 4 Euro each
all sold - thank you!
+ Discrete Diamond Fon Feedback I/V for TDA1541A by Pedja Rogic, PCB design by dcb-project, green: 2 pcs available à 4 Euro
all sold - thank you!
+ EASYDAC, mobile AD1862 USB powered DAC, design and PCB artwork by Miro1360, this is my mobile DAC, thread on DIYAudio, green: 3 available à 3 Euro
+ AD1862 DAC by Miro1360 - his design and artwork - great DAC! pcb rev 1.3.(dil opamp socket), green: 3 available, 3 Euro each
one gone - thank you!
+ AD1862 DAC by Miro1360 - his design and artwork - great DAC! pcb rev 1.3.(dip opamp socket), white: 3 available, 3 Euro each
+ Marc Johnsons SMPS inline filter, design and PCB layout by Marc Johnson, white, 5 available à 1 Euro
all sold thank you!
+ Formula3 HP, design Lineup, layout Prasi; haven't yet built it, but I will; green: 2 available, 3 Euro each.
1 sold thank you!
+ Whammy HPA, small smd version, great desing by Wayne Colburne, layout by BOLOR, white: 3 available, 3 Euro each.
1 sold thank you!
+ M2 Amp. Design Nelson Pass, very nice and compact layout Prasi, white: 2 available 4 Euro each.
sold - thank you!
NEW + MISSOURI Input Card (for edcor trafo and THAT1200) for Pass Sony V-Fet Amp and THESEUS Amp - circuit design and art work: Marc Johnson - 2 available - 4 Euro each (2 needed for a stereo amp)
NEW + THESEUS - PSFILT - Filterboard for PSU - 2 oz copper - circuit design and art work: Marc Johnson - 2 available - 7 Euro each
!!! There are some more pcbs left over from my last attempt trying to bring a few things under people. Here is the link. If you think, prices are too high, offers are welcome if you keep them realistic. I reserve the right not to reply to what I consider to be inappropriate offers. https://www.diyaudio.com/community/...in-europe-pcbs-and-ldr-pre-usb-bridge.339885/
+++ from the old thread, the complete Salas shunt parts are sold - thank you.
+++ from tho old thread, Cap Mx and small Cap Ms pending.
I would send pcbs in a padded envelope. Germany: 1,60 € plus 2,35 € for a registered letter. Europe: 3,70 for a letter and 6,05, if it should be a registered one.
Fully built and working amps:
+ Noir HPA - Marks diskret SE class A headphone amp. Pls see pictures further down. Fully built (Mouser parts and chinese DACT type pot) and working - with MeanWell PSU: 150 Euro
probably ACA 24V linear PSU 1.4A Iq in nice chassis and Salas DCG3 coming (if anybody is interesed, please ask)
Thanks for looking 🙂
Ernst
Last edited:
Should the buyer for
Discrete Diamond Fon Feedback I/V for TDA1541A by Pedja Rogic, PCB design by dcb-project
back out I will take 1 or 2.
Discrete Diamond Fon Feedback I/V for TDA1541A by Pedja Rogic, PCB design by dcb-project
back out I will take 1 or 2.
Added following pcbs - 2 pcs each
MISSOURI Input Card for Pass Sony V-Fet Amp and THESEUS Amp - circuit design and art work: Marc Johnson
THESEUS - PSFILT - Filterboard for PSU - circuit design and art work: Marc Johnson
MISSOURI Input Card for Pass Sony V-Fet Amp and THESEUS Amp - circuit design and art work: Marc Johnson
THESEUS - PSFILT - Filterboard for PSU - circuit design and art work: Marc Johnson
