8 inch wide heatsink 11 inch wide heatsink

[HeatsinkUSA]

8 inch wide heatsink,serrated fins,e mail me for the lengths and prices,
also 11 inch wide heatsink i hope my pics fit on here this time.
thanks

 

[officeboy]

How thick is that base?
And how much do you want for a section?

 

[HeatsinkUSA]

the base is 1/4 inch thick,i have 2 pieces a little under 24 inches long and various others around a foot or so
15$ per foot or ill make a package deal to get rid of it all

 

[csthiang]

what other sizes do you have? what about the shipping rates?

 

[HeatsinkUSA]

i have several sizes of sink too many to list all i can do is wait for a specific request,then go from there
as far as shipping, i charge only actual shipping charges -no handling or packing,
i pack better than needed
to calculate shipping i need an address to calculate with
at this time i have 5 3/8 in wide
8 inwide
some 10 in wide
5 9/16 wide
and some 11 inch wide
plus a lot of oddball sinks please just ask what your looking for,
all new extrusions
emails are welcome
thanks

 

[csthiang]

I was wondering if the 3/8 inch heatsink can handle 180W of continous heat? I have a peltier which is about 180W and i still can't really use it without proper cooling the hot side. Peltier is 5by 5 cm in size and must have full contact with heatsink.

 

[HeatsinkUSA]

to be honest with you,i have no idea about the c/w rating all i can provide is the dimensions.

 

[csthiang]

price for the 3/8inch heatsink + shipping to singapore?
anyway if it does not work, i can use for my amp projects...
any pics for the 3/8inch heatsink?

 

[hifimaker]

Do you have large heatsinks with 1.5-2" height, base + fin?

thanks,

-Daivd

 

[HeatsinkUSA]

large heatsinks

at the moment the biggest heatsink i have is the 10.88 wide with 32 fins,this is 1 3/8 high, base and fins included
i will be getting some taller stuff soon with 2 inch fins and 1/2 " base but it wil be 6 inches wide,ill post a pic soon as i get it
i always try and get the bigger heatsinks if i can
i will be having a die built as soon as funds provide to make a heat sink with 2 inch fins 10 inch wide 3/8 base but this costs approximately 4000$ so in the meantime i have to work with what i can get
thanks
russ

 

[hifimaker]

Hi Russell,

There were hundreds of Aleph X boards recently sold in the group buy.

Have you thought of organizing a group buy for the heatsinks to help with your start-up costs for the large die?

I'd be really interested in a heat sink the size you are proposing, and others maybe as well. You might consider preparing a proposal and placing it in the Pass Labs forum here.

-David

 

[HeatsinkUSA]

hello,
thank you this is a very interesting idea . i will give it some thought, i appreciate all the diy peoples help and ideas
thanks
russ

 

[MikeW]

Thanks

Thanks for the heatsinks. Do you have more 11 w X 6 H ?😀

 

[HeatsinkUSA]

hello
yes i have some 11 inch wide profile,
e mail me at barrredboss@yahoo.com
thanks
russ