Looking for a couple of these to hopefully 'complete' the work I'm doing on an Exposure IV amp.
Please PM me if you have any that you can spare!! 🙂
Please PM me if you have any that you can spare!! 🙂
Wow....just over £11.00 for 2...delivered!!
Is that going to be a typical price (haven't bought these before)???
Is that going to be a typical price (haven't bought these before)???
See the breakup.
Ask for 20, or other parts in the same order
Some sites charge a fixed amount for shipment.
Ask for 20, or other parts in the same order
Some sites charge a fixed amount for shipment.
There are cheaper brands at parts connexion, Percy audio, etc.
Polystyrene (pF) Capacitor 39pF 160Vdc
I would buy these ASAP, they are excellent, and are better than others now available.
Capacitor F 39pF 63V styroflex SIEMENS first selection Annual 1973 MINT CONDITION. | eBay
Polystyrene (pF) Capacitor 39pF 160Vdc
I would buy these ASAP, they are excellent, and are better than others now available.
Capacitor F 39pF 63V styroflex SIEMENS first selection Annual 1973 MINT CONDITION. | eBay
Last edited:
.........I would buy these ASAP, they are excellent, and are better than others now available.
Capacitor F 39pF 63V styroflex SIEMENS first selection Annual 1973 MINT CONDITION. | eBay
Ordered....thanks!!
You won't regret it. Siemens Styroflex are excellent, but have been unavailable for decades.
Heat sink the leads next to the body, and solder quickly.
I still have a small selection of NOS that I bought when new, which I use for only the most critical circuits.
Heat sink the leads next to the body, and solder quickly.
I still have a small selection of NOS that I bought when new, which I use for only the most critical circuits.
Last edited:
You won't regret it. Siemens Styroflex are excellent, but have been unavailable for decades.
Heat sink the leads next to the body, and solder quickly.
I still have a small selection of NOS that I bought when new, which I use for only the most critical circuits.
Well....caps arrived...and measured 54pf and 55pf...which is well away from the 39pf stated!! Law of Sod I know! 🙂
Will be returning these.
If you used a typical digital multimeter to measure the value, the leads add capacitance. I suspect they will work in circuit just fine.
Well....caps arrived...and measured 54pf and 55pf...which is well away from the 39pf stated!! Law of Sod I know! 🙂
Will be returning these.
Either your tester is off, or they are fake. Does it measure other small value capacitors accurately?
I've never seen any of these capacitors out of tolerance, not even one.
- Home
- Design & Build
- Parts
- 39pf Polystyrene caps....a couple WANTED please