2U w/Quasi Heatsink and ventilation

[poseidonsvoice]

Some questions, regarding this unit: 2U Quasi-Heatsink Chassis in Tube Project Style - One solid cover, one vented cover - Full Width with Quasi Heatsinks - Chassis

1. Is it okay to have the vented panel on top? Looks like it.

2. Do you sell the Quasi Heatsinks separately. It could be useful to add a divider to the enclosure.

3. Are all the panels 3mm thick except for the front panel?

Thanks,

Anand.

 

[Jason]

1. It's up to you 🙂
2. No.
3. Yes, all 3mm alu. The quasi heatsinks are, if I recall correctly, 10mm or so (total width). But we for some reason don't seem to have measurements on that.

 

[poseidonsvoice]

Jason!

Thanks for getting back to me.

Anand.

 

[poseidonsvoice]

Jason,

Is the height 80mm the inside height or is it actually 80-6 = 74mm?

Thanks,
Anand.

 

[Jason]

It's 80mm inside. The top and bottom panels sit on the "sides" of the heatsinks.

 

[Jason]

You can actually fit one of the regular 40mm deep heatsinsks "inside" - they are 80mm wide and it will be a flush fit.

 

[poseidonsvoice]

So the useable internal space is 415 mm by 280 mm by 80 mm?

Thanks,
Anand.