Gentlemen,
for reasons of historical interest and sake of completeness
let me offer some Audire schematic diagrams here.
The company owner Julius Siksnius died some time ago and
can no longer be asked. I did repairs for the local distributor
and we received the schematics by letter or Fax - but the scan
quality is not too bad thanks to my lawyer (you know what a
lawyer is good for). These are the "official" factory diagrams,
in pen and ruler style as usual at the time. Hand written
remarks "in English" are from Julius himself.
I am sorry I do not have any preamp schematics except for
model Legato.
The power amps are pretty similar and use the same driver
structure for each model. The only difference apart from supply
voltage and hence power output is the number of output devices
and some adapted parts values.
He did not include schematics of the power amp supplies, these
are simple and do not need any clarification.
Except for standard current limit and supply fuses the power amps
have no protection circuits and speaker relays.
Everybody is invited to share their Audire circuits here, thanks !
for reasons of historical interest and sake of completeness
let me offer some Audire schematic diagrams here.
The company owner Julius Siksnius died some time ago and
can no longer be asked. I did repairs for the local distributor
and we received the schematics by letter or Fax - but the scan
quality is not too bad thanks to my lawyer (you know what a
lawyer is good for). These are the "official" factory diagrams,
in pen and ruler style as usual at the time. Hand written
remarks "in English" are from Julius himself.
I am sorry I do not have any preamp schematics except for
model Legato.
The power amps are pretty similar and use the same driver
structure for each model. The only difference apart from supply
voltage and hence power output is the number of output devices
and some adapted parts values.
He did not include schematics of the power amp supplies, these
are simple and do not need any clarification.
Except for standard current limit and supply fuses the power amps
have no protection circuits and speaker relays.
Everybody is invited to share their Audire circuits here, thanks !
Last edited:
And finally the Big Boy Audire Otez amp. Hard to find anything with high power like here.
Note there are 8 pairs of output transistors and 4 pairs of fuses per channel.
This is not shown in the diagram.
Note there are 8 pairs of output transistors and 4 pairs of fuses per channel.
This is not shown in the diagram.
Audire Crescendo Troubleshooting on Audiokarma
https://audiokarma.org/forums/index.php?threads/troubleshooting-help-audire-crescendo-amp.1058283/
https://audiokarma.org/forums/index.php?threads/troubleshooting-help-audire-crescendo-amp.1058283/
A different Legato schematic is here :
https://audiocircuit.dk/downloads/a-other/Audire-Legato-pre-sch.pdf
The one on HiFi Engine looks the same.
https://audiocircuit.dk/downloads/a-other/Audire-Legato-pre-sch.pdf
The one on HiFi Engine looks the same.
Good scan of the Forte circuit, but without balanced input :
Another good scan is on HiFi Engine.
Another good scan is on HiFi Engine.
Thank you for sharing these historically valuable Audire schematics. Julius Siksnius' handwritten notes add a personal touch, and it’s helpful to know that the power amp designs are structurally similar, differing mainly in output devices and part values. Your explanation about the simple power supplies and lack of protection circuits is also clear and useful.
Thanks for sharing that info. I'll just mention here for people looking at this in the future: It looks like the Crescendo power amp runs on 46V rails but the quad transistor IC used for the input diff amp has a 40V max VCE (the -A version of the parts gives you an extra 5V for a 45V max) !!
http://matthieu.benoit.free.fr/cross/data_sheets/MPQ6600.pdf
http://matthieu.benoit.free.fr/cross/data_sheets/MPQ6600.pdf