Hello guys!
I think its time for a giveaway!
This morning I woke up a bit early and like usually I started with checking my emails.
Well there was a particular email that jumped into my eyes. Always when I receive emails from this person and another particular one makes me very happy.
Well this time the email made me double happy 🙂)
To mention that I am not a rich guy, impression that I left around here because of giving away stuff.. its quite the contrary. In life no matter if rich or poor.. if you want to get you always have also to give so.. here I am making room for new stuff 🙂)
This time a stereo xa252 pop kit will be given away, the shipping will be on me.
One channel in the kit looks like this.
Both channels are new, tested and working. I will provide the thd measurements to the winner.
How it'll work:
To enter, just copy the list of entrants, paste into a new comment, add your DIYA username to the bottom of that list and post. Sunday at 10pm my time(or a bit later if I forget), I'll make a comment saying that entries are closed. I'll take the final list of entrants, paste them into an online randomizer, and the name that appears in the top (#1) position will be the winner.
And big thanks to everyone specially to Pa and ZM!
For this giveaway you should thank to them and not to me, if it wasn’t them to be so generous and share their ideas this wouldn’t have been possible.
Good luck!
I think its time for a giveaway!
This morning I woke up a bit early and like usually I started with checking my emails.
Well there was a particular email that jumped into my eyes. Always when I receive emails from this person and another particular one makes me very happy.
Well this time the email made me double happy 🙂)
To mention that I am not a rich guy, impression that I left around here because of giving away stuff.. its quite the contrary. In life no matter if rich or poor.. if you want to get you always have also to give so.. here I am making room for new stuff 🙂)
This time a stereo xa252 pop kit will be given away, the shipping will be on me.
One channel in the kit looks like this.
Both channels are new, tested and working. I will provide the thd measurements to the winner.
How it'll work:
To enter, just copy the list of entrants, paste into a new comment, add your DIYA username to the bottom of that list and post. Sunday at 10pm my time(or a bit later if I forget), I'll make a comment saying that entries are closed. I'll take the final list of entrants, paste them into an online randomizer, and the name that appears in the top (#1) position will be the winner.
And big thanks to everyone specially to Pa and ZM!
For this giveaway you should thank to them and not to me, if it wasn’t them to be so generous and share their ideas this wouldn’t have been possible.
Good luck!
One more thing!
If more than 70 users join this giveaway then there is also a prize for the 2nd place, how about that?
The prize for the 2nd place?
A set of adjustable gain front ends that can be used as a biamp preamp or biamp front end for some output followers. Can get you up to 15vrms or 35w/8r.
The pcbs are new and tested. Will come with thd measurements.
Each pcb hosts 2 channels that can be used only for biamp or you can use half pcb if don’t biamp but it will be a bit of waste..
Pcbs look like this
They are similar to the Diy fe 2022 that Pa published.
The small modules are thump silencers.
If more than 70 users join this giveaway then there is also a prize for the 2nd place, how about that?
The prize for the 2nd place?
A set of adjustable gain front ends that can be used as a biamp preamp or biamp front end for some output followers. Can get you up to 15vrms or 35w/8r.
The pcbs are new and tested. Will come with thd measurements.
Each pcb hosts 2 channels that can be used only for biamp or you can use half pcb if don’t biamp but it will be a bit of waste..
Pcbs look like this
They are similar to the Diy fe 2022 that Pa published.
The small modules are thump silencers.
Amazing, @schultzsch !! 😍 And thanks you for your generosity. I´ll be happy to volunteer as the first on the list 👍
@Boydk
@Boydk
Boydk.. you are missing Gyuri’s post. I think if he likes how the first set of pcbs look then for sure he likes also the second row so I think we need to keep him in the head of the list.
@Gyuri
@Boydk
@jean-paul
@Gill.T
@Gyuri
@Boydk
@jean-paul
@Gill.T
Having a pair of Schultzsch's wonderful pcbs already.. do I need more?
Gyuri
Boydk
jean-paul
Gill.T
JeyDee
BrianGasberg
lydlaug
a007udio
ZeneBona
Zoundhead
Angchuck
Geoturbo
Gyuri
Boydk
jean-paul
Gill.T
JeyDee
BrianGasberg
lydlaug
a007udio
ZeneBona
Zoundhead
Angchuck
Geoturbo
