Nelson Pass AB100

[baggerbole]

I have 2 channels on a solid aluminium plate on offer. Built with good components and Sanken 2SB1560/2SD2390 output transistors on Prasi pcbs. The boards are ready to use and set to 270mA at +/-35V. The DC offset is below 10mV after warm-up. The aluminium plate has 3 M5 threaded holes on both long sides, prepared for heat sink mounting. At low output power, the aluminium plate is sufficient for cooling if it is positioned vertically.
I would like €130 + shipping for it. The weight is 3kg, shipping from Germany.

 

[Oracle1]

I am interested.
I want the amp

 

[baggerbole]

SOLD!

that was quiiick

 

[franzm]

Schade!