Is this Satori suitable for a VP and how ideal?
Also the flax evo
| 7.5" Coaxial Driver Combo Tweeter and Mid-woofer |
| AudioXpress.com Test Bench |
| Data is correct to stock at time of printing, however SBA are constantly improving their stock and data may change without notice. For the latest datasheets, please see www.sbacoustics.com |
| Black Cone |
| 60W |
| 7.2mm |
| 0.31 |
| 0.5kg/s |
| 1.13mm/N |
| 43Hz |
| 90dB |
| each |
| Mid-Woofer |
| 37.1L |
| 6.54 |
| 0.33 |
| 0.12mH |
| 0.12mH |
| 8 ohm |
| 1.1T |
| 152cm² |
| 165mmØ |
| 39mmØ |
| 12.1g |
| 0.13kg |
| 116mm |
| 187mmØ |
| 6.5Ω |
| 8Ω Re 6.5Ω |
| Satori |
| Single |
| Satori |
| SAT16-GRL |
| 1 |
| 60Wrms |
| 7.5' |
| 8.05Tm |
[th width="201.734px"]
Description
[/th][th width="201.734px"]
Review
[/th][th width="201.734px"]
Note.
[/th][th width="201.734px"]
Colour
[/th][th width="201.734px"]
Prms
[/th][th width="201.734px"]
Xmax
[/th][th width="201.734px"]
Qts
[/th][th width="201.734px"]
Rms
[/th][th width="201.734px"]
Cms
[/th][th width="201.734px"]
Fs
[/th][th width="201.734px"]
Sens.
[/th][th width="201.734px"]
Price Type
[/th][th width="201.734px"]
Type
[/th][th width="201.734px"]
Vas
[/th][th width="201.734px"]
Qms
[/th][th width="201.734px"]
Qes
[/th][th width="201.734px"]
Zn
[/th][th width="201.734px"]
Le
[/th][th width="201.734px"]
Impedance (Ohm)
[/th][th width="201.734px"]
Flux (lm)
[/th][th width="201.734px"]
Sd
[/th][th width="201.734px"]
Width
[/th][th width="201.734px"]
Coil
[/th][th width="201.734px"]
Mms
[/th][th width="201.734px"]
Mag.
[/th][th width="201.734px"]
Depth
[/th][th width="201.734px"]
Diam.
[/th][th width="201.734px"]
Re
[/th][th width="201.734px"]
Impedance
[/th][th width="201.734px"]
Series
[/th][th width="201.734px"]
Sold As
[/th][th width="201.734px"]
Manufacturer
[/th][th width="201.734px"]
Grille
[/th][th width="201.734px"]
QTY
[/th][th width="201.734px"]
Power
[/th][th width="201.734px"]
Size
[/th][th width="201.734px"]
Bl
[/th]Also the flax evo
hmmm... says Focal on the driver...
And if that graph shows the FR with the tweeter, then yikes, that's a wild ride up there.
Along with the recessed mids, I think you will be better choosing the real Satori coax.
And if that graph shows the FR with the tweeter, then yikes, that's a wild ride up there.
Along with the recessed mids, I think you will be better choosing the real Satori coax.
If a driver works in a vented box, then it's suited to an ML-Voigt (aka Voigt horn, [single] tapped horn, offset-driver horn, 'Voigt pipe' [certain baggage with that name], ML-TQWT [ditto], or whatever handle you want to hang on it). The driver loading requirements are basically the same -slightly more flexibility but these things are relative.
