replacement for Mundorf 2200uF/63V

Jump to Latest
B

back

Member
Joined 2005
#1
Hello.i need to replace the mundorf 2200uf 63v with 2200uf/80v.i have six first one modules and in one of them the caps failed after 8 years.
luckily it became noisy before it fail completely and destroy the module.
i would like to replace with 80-100v since the 63v is near the limit.
any recommendations?
 
#2
The Mundorf caps failed after just eight years? That is disappointing for such expensive capacitors.
If that’s the case, I’d look at brands with better reliability and longevity like
Nichicon, Panasonic and Rubycon.
 
#4
I used the specification of the Mundorf AG caps for a search of in-stock capacitors at Mouser(USA).
https://www.mouser.com/c/passive-components/capacitors/aluminum-electrolytic-capacitors/?capacitance=2200 uF&diameter=20 mm~~25.4 mm&termination style=Snap In&voltage rating dc=80 VDC~~100 VDC&instock=y&rp=passive-components/capacitors/aluminum-electrolytic-capacitors|~Voltage Rating DC|~Diameter

I had those modules at one time, but don't remember if snap-in caps will fit the pcb holes. The original Mundorfs have straight pin leads.
 
You must log in or register to reply here.
Top Bottom