SOLD
Posted some time ago to sell some spare blank boards but there was no interests.
So i went ahead to purchase parts to populate and tested.
Info on the boards :
https://www.diyaudio.com/community/threads/lt4320-based-active-rectifier.336572/page-78#post-7729619
All the parts are smd devices, hand soldered by me meticulously. Boards are cleaned with IPA to make sure there is no residual flux left behind.
MOSFETs used are TPH4R008NH, which is one of those listed by Prasi
https://www.mouser.sg/ProductDetail/Toshiba/TPH4R008NHL1Q?qs=sA3qAAQcQeEIWvkYMlVV6Q==
I have not installed the LED, which i deem as redundant. C1 and C2 are also skipped, which i feel is unnecessary unless the rectifier is wire over a long length to the filter caps. Some well-experienced member has also reflected that the caps on board is not really necessary.
The pair of boards + shipping to you ( registered + tracking) = USD 50
Paypal FF only please.
Posted some time ago to sell some spare blank boards but there was no interests.
So i went ahead to purchase parts to populate and tested.
Info on the boards :
https://www.diyaudio.com/community/threads/lt4320-based-active-rectifier.336572/page-78#post-7729619
All the parts are smd devices, hand soldered by me meticulously. Boards are cleaned with IPA to make sure there is no residual flux left behind.
MOSFETs used are TPH4R008NH, which is one of those listed by Prasi
https://www.mouser.sg/ProductDetail/Toshiba/TPH4R008NHL1Q?qs=sA3qAAQcQeEIWvkYMlVV6Q==
I have not installed the LED, which i deem as redundant. C1 and C2 are also skipped, which i feel is unnecessary unless the rectifier is wire over a long length to the filter caps. Some well-experienced member has also reflected that the caps on board is not really necessary.
The pair of boards + shipping to you ( registered + tracking) = USD 50
Paypal FF only please.
Last edited:
